Hardware/Framework/Laptop 16 - Revision history

Breakingbread: /* Useful utilities */

2026-06-08T22:50:22Z

Useful utilities

← Older revision		Revision as of 22:50, 8 June 2026
Line 258:		Line 258:

	<syntaxhighlight lang="nix">		<syntaxhighlight lang="nix">
	inputmodule.enable = true;		hardware.inputmodule.enable = true;
	</syntaxhighlight>		</syntaxhighlight>

	Example (LED matrix clock):		Example (LED matrix clock):

	<syntaxhighlight lang="sh">		<syntaxhighlight lang="sh"># Serial device is often /dev/ttyACM0 (or ttyACM1 if you have two modules)
	# Serial device is often /dev/ttyACM0 (or ttyACM1 if you have two modules)		inputmodule-control --serial-dev /dev/ttyACM0 led-matrix --clock</syntaxhighlight>
	inputmodule-control --serial-dev /dev/ttyACM0 led-matrix --clock
	</syntaxhighlight>

	== External resources ==		== External resources ==

	There is [https://community.frame.work/t/nixos-on-the-framework-laptop-16/46743 a NixOS thread on the Framework forum], where you can find additional help, guidance, and example configurations.		There is [https://community.frame.work/t/nixos-on-the-framework-laptop-16/46743 a NixOS thread on the Framework forum], where you can find additional help, guidance, and example configurations.

Atvor: Mention systemd bug resulting in idle-suspend loop

2025-12-30T16:28:07Z

Mention systemd bug resulting in idle-suspend loop

← Older revision		Revision as of 16:28, 30 December 2025
Line 41:		Line 41:

	[[Linux kernel\|Using the latest kernel]] will fix some issues. Also read configuration hints in this article.		[[Linux kernel\|Using the latest kernel]] will fix some issues. Also read configuration hints in this article.

			=== Double suspend after GNOME automatic/idle suspend (systemd v258 regression) ===

			Some users have reported a "double suspend" / "suspend loop" on Framework Laptop 16 (notably with GNOME and the NVIDIA dGPU module): after the machine suspends due to automatic idle suspend and is resumed, it may suspend again ~20-30 seconds later (sometimes repeating multiple times). Manual suspend and lid-close suspend may still behave normally.

			Upstream tracking:

			* https://github.com/systemd/systemd/issues/40078
			* https://github.com/systemd/systemd/issues/39259

			==== Workaround 1: add a post-resume sleep inhibitor ====

			Add this snippet to configuration.nix:

			<syntaxhighlight lang="nix">
			systemd.services.inhibit-sleep-after-resume = {
			description = "Temporary sleep inhibitor after resume (workaround for double-suspend)";
			wantedBy = [ "post-resume.target" ];
			after = [ "post-resume.target" ];
			serviceConfig.Type = "oneshot";
			script = ''
			${pkgs.systemd}/bin/systemd-inhibit \
			--mode=block \
			--what=sleep:idle \
			--why="Workaround: avoid immediate second suspend after resume" \
			${pkgs.coreutils}/bin/sleep 60
			'';
			};
			</syntaxhighlight>

			==== Workaround 2: disable GNOME idle-suspend (low risk; lid-close suspend still works) ====

			===== Quick (imperative) test =====

			Disable idle suspend on AC power:

			<syntaxhighlight lang="sh">
			gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type 'nothing'
			gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0
			</syntaxhighlight>

			Optionally also disable it on battery:

			<syntaxhighlight lang="sh">
			gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type 'nothing'
			gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 0
			</syntaxhighlight>

			===== Declarative configuration (recommended) =====

			<syntaxhighlight lang="nix">
			{ lib, ... }:

			{

			# Declaratively set GNOME dconf defaults.

			programs.dconf.enable = true;
			programs.dconf.profiles.user.databases = [
			{
			settings = {
			"org/gnome/settings-daemon/plugins/power" = {
			# Disable idle-suspend on AC power (keeps lid-close suspend behavior):
			sleep-inactive-ac-type = "nothing";
			sleep-inactive-ac-timeout = lib.gvariant.mkUint32 0;

			# Optional: also disable idle-suspend on battery:
			# sleep-inactive-battery-type = "nothing";
			# sleep-inactive-battery-timeout = lib.gvariant.mkUint32 0;
			};
			};
			}

			];
			}
			</syntaxhighlight>

			After applying, log out and log back in (or reboot) to ensure GNOME picks up the updated settings.

			==== Workaround 3: pin nixpkgs to pre-systemd-v258 for the affected machine (higher impact) ====

			If you prefer to keep GNOME idle-suspend enabled, another workaround is to pin the affected system to a nixpkgs revision before systemd v258 landed.

			* Commit that introduced systemd v258: https://github.com/NixOS/nixpkgs/commit/70ca21d3c4982d7f95e48688d02cd9ef6b1347f5
			* Latest pre-v258 commit (pre-merge parent): https://github.com/NixOS/nixpkgs/commit/d3736636ac39ed678e557977b65d620ca75142d0.

	== Configuration ==		== Configuration ==

Atvor: Use non-flake version of nix shell

2025-12-30T12:01:18Z

Use non-flake version of nix shell

← Older revision		Revision as of 12:01, 30 December 2025
Line 83:		Line 83:

	<syntaxhighlight lang="sh">		<syntaxhighlight lang="sh">
	$ nix shell ~~nixpkgs#~~pciutils -c lspci \| grep -E "VGA\|3D\|Display"		$ nix-shell -p pciutils --run 'lspci \| grep -E "VGA\|3D\|Display"'
	</syntaxhighlight>		</syntaxhighlight>

Line 103:		Line 103:
	<syntaxhighlight lang="sh">		<syntaxhighlight lang="sh">
	# Default: should show AMD iGPU		# Default: should show AMD iGPU
	nix shell ~~nixpkgs#~~mesa-demos -c glxinfo -B \| grep -E "OpenGL vendor\|OpenGL renderer"		nix-shell -p mesa-demos --run 'glxinfo -B \| grep -E "OpenGL vendor\|OpenGL renderer"'

	# Offload: should show NVIDIA dGPU		# Offload: should show NVIDIA dGPU
	nix shell ~~nixpkgs#~~mesa-demos -c nvidia-offload glxinfo -B \| grep -E "OpenGL vendor\|OpenGL renderer"		nix-shell -p mesa-demos --run 'nvidia-offload glxinfo -B \| grep -E "OpenGL vendor\|OpenGL renderer"'

	# Idle power check: should become "suspended" when idle		# Idle power check: should become "suspended" when idle

Atvor: Cleanup, mention nixos-hardware, explain validation and troubleshooting

2025-12-29T21:16:21Z

Cleanup, mention nixos-hardware, explain validation and troubleshooting

Show changes

0x4A6F at 17:11, 8 August 2025

2025-08-08T17:11:51Z

← Older revision		Revision as of 17:11, 8 August 2025
Line 11:		Line 11:
	!Manufacturer		!Manufacturer
	\|[[Hardware/Framework\|Framework]]		\|[[Hardware/Framework\|Framework]]
			\|-
			!Support
			\|[https://knowledgebase.frame.work/framework-component-linux-support-matrix-B1gwmFtPgg components]
	\|-		\|-
	!Architecture		!Architecture
Line 17:		Line 20:
	!colspan="2" class="title"\|7040 Series		!colspan="2" class="title"\|7040 Series
	\|-		\|-
	!~~Status~~		!Maintainer
	\|~~maybe supported~~		\|-
	\|}		\|}
	</div>		</div>

Darks1de: Added example command to control inputmodule

2025-06-18T17:04:28Z

Added example command to control inputmodule

← Older revision		Revision as of 17:04, 18 June 2025
Line 84:		Line 84:
	It can be enabled by specifing the following:		It can be enabled by specifing the following:
	inputmodule.enable = true;		inputmodule.enable = true;
			With the following command you can display the time on your inputmodule.
			It might be necassary to specify your device which will be usually ttyACM0 and ttyACM1, if you have two input modules.
			inputmodule-control --serial-dev /dev/ttyACM1 led-matrix --clock
	== External resources ==		== External resources ==
	There is [https://community.frame.work/t/nixos-on-the-framework-laptop-16/46743 a NixOS thread on the Framework forum], where you can find additional help, guidance and example configurations.		There is [https://community.frame.work/t/nixos-on-the-framework-laptop-16/46743 a NixOS thread on the Framework forum], where you can find additional help, guidance and example configurations.

Darks1de: Added section with 2 tools for the framework16

2025-06-18T16:46:22Z

Added section with 2 tools for the framework16

← Older revision		Revision as of 16:46, 18 June 2025
Line 77:		Line 77:
	=== Bios Configuration ===		=== Bios Configuration ===
	[https://guides.frame.work/Guide/Ubuntu+22.04+LTS+Installation+on+the+Framework+Laptop+16/306?lang=en#s1974 Enable Linux Audio Compatibility in the bios] to improve speaker audio quality.		[https://guides.frame.work/Guide/Ubuntu+22.04+LTS+Installation+on+the+Framework+Laptop+16/306?lang=en#s1974 Enable Linux Audio Compatibility in the bios] to improve speaker audio quality.

			== Useful Utilities ==
			There are also utilities, which are helping managing your framework.
			The framework-tool provides Rust libraries and tools to interact with the system.
			Also there is a tool for controlling the inputmodules like the led matrix.
			It can be enabled by specifing the following:
			inputmodule.enable = true;

	== External resources ==		== External resources ==
	There is [https://community.frame.work/t/nixos-on-the-framework-laptop-16/46743 a NixOS thread on the Framework forum], where you can find additional help, guidance and example configurations.		There is [https://community.frame.work/t/nixos-on-the-framework-laptop-16/46743 a NixOS thread on the Framework forum], where you can find additional help, guidance and example configurations.

Breakingbread at 13:18, 26 February 2025

2025-02-26T13:18:13Z

← Older revision		Revision as of 13:18, 26 February 2025
Line 65:		Line 65:
	!Vendor and Product ID		!Vendor and Product ID
	\|-		\|-
	\|RGB Macropad 16		\|RGB Macropad
	\|32ac 0013		\|32ac 0013
	\|-		\|-

Breakingbread: Add different vendor and product ids for products

2025-02-26T12:55:08Z

Add different vendor and product ids for products

← Older revision		Revision as of 12:55, 26 February 2025
Line 60:		Line 60:
	<nowiki> </nowiki> SUBSYSTEM=="usb", DRIVERS=="usb", ATTRS{idVendor}=="32ac", ATTRS{idProduct}=="0014", ATTR{power/wakeup}="disabled", ATTR{driver/1-1.1.1.4/power/wakeup}="disabled"		<nowiki> </nowiki> SUBSYSTEM=="usb", DRIVERS=="usb", ATTRS{idVendor}=="32ac", ATTRS{idProduct}=="0014", ATTR{power/wakeup}="disabled", ATTR{driver/1-1.1.1.4/power/wakeup}="disabled"
	<nowiki>''</nowiki>;		<nowiki>''</nowiki>;
	~~The~~ Product and Vendor IDs can be found using lsusb.		{\| class="wikitable"
			\|+
			!Product
			!Vendor and Product ID
			\|-
			\|RGB Macropad 16
			\|32ac 0013
			\|-
			\|Backlit keyboard ISO
			\|32ac 0018
			\|}
			Other Product and Vendor IDs can be found using lsusb.

	This does not prevent the trackpad from waking up the device. This however seems to happen less in a backpack.		This does not prevent the trackpad from waking up the device. This however seems to happen less in a backpack.

Granddave: Capitalize NixOS and Framework

2024-12-16T19:21:01Z

Capitalize NixOS and Framework

← Older revision		Revision as of 19:21, 16 December 2024
Line 68:		Line 68:

	== External resources ==		== External resources ==
	There is [https://community.frame.work/t/nixos-on-the-framework-laptop-16/46743 a ~~nixos~~ thread on the ~~framework~~ forum], where you can find additional help, guidance and example configurations.		There is [https://community.frame.work/t/nixos-on-the-framework-laptop-16/46743 a NixOS thread on the Framework forum], where you can find additional help, guidance and example configurations.