All translations

Enter a message name below to show all available translations.

Found 2 translations.

Name	Current message text
^h English (en)	Where supported, Nix can be used to build U-boot from its main-line repositories. See [[U-Boot#Building a packaged U-Boot]] for further information. The resulting firmware image can then be flashed to SPI with tools such as <code>flashcp</code> or <code>flashrom</code>, or installed to EMMC/SD card by writing to specific offsets. This is platform specific, refer to [https://github.com/u-boot/u-boot/tree/master/doc/board upstream U-boot documentation for your platform or board].
^h 中文 (zh)	在支持的情况下，Nix 可从其主线存储库中构建 U-boot。更多信息请参阅 [[Special:MyLanguage/U-Boot#Building a packaged U-Boot\|构建 U-Boot]]。生成的固件镜像随后可以使用 <code>flashcp</code> 或 <code>flashrom</code> 等工具刷入 SPI，或通过写入特定偏移位置的方式安装到 EMMC/SD 卡。操作因平台而异，具体请参阅 [https://github.com/u-boot/u-boot/tree/master/doc/board 针对您平台或主板的 U-boot 上游文档]。