Emacs
Emacs is a free and open-source text editor known for its exceptional extensibility and adaptability. It can be customized into anything from a simple editor to a full development environment or productivity tool. Emacs features built-in self-documentation, syntax-aware editing, and a vast ecosystem of community-developed packages.[1]
For an easier introduction, Doom Emacs offers a pre-configured Emacs framework with modern defaults and features like IDE tools, note-taking, and task management.
There is an official Matrix room for Nix/Emacs: #emacs:nixos.org.
Installation
Shell
To temporarily use Emacs in a shell environment without modifying your system configuration, you can run:
$ nix-shell -p emacs
This makes the Emacs editor available in your current shell. You can then launch Emacs by typing emacs
.
System setup
To install Emacs system-wide, making it available to all users, add the following to your configuration:
# Example for /etc/nixos/configuration.nix
environment.systemPackages = [
pkgs.emacs
];
# User-specific installation (in ~/.config/nixpkgs/home.nix)
home.packages = [
pkgs.emacs
];
After rebuilding your system with nixos-rebuild switch
or home-manager switch
, Emacs will be installed and accessible.
Configuration
Basic
programs.emacs = {
enable = true;
defaultEditor = true;
};
Advanced
# Global Configuration
# Emacs is running as a daemon here, accesible via the "emacsclient" command
services.emacs = {
enable = true;
package = pkgs.emacs;
};
# Home Configuration
programs.emacs = {
enable = true;
package = pkgs.emacs; # replace with pkgs.emacs-gtk if desired
defaultEditor = true;
extraConfig = ''
(setq standard-indent 2)
'';
};
Tips and Tricks
Installing Packages
One can mix and match whether Emacs packages are installed by Nix or Emacs. This can be particularly useful for Emacs packages that need to be built, such as vterm. One way to install Emacs packages through Nix is by the following, replacing emacs-pgtk
with the variant in use:
environment.systemPackages = with pkgs;
[ ...
((emacsPackagesFor emacs-pgtk).emacsWithPackages (
epkgs: [ epkgs.vterm ]
))
...
];
# To make the packages available to emacsclient, one can do the following:
services.emacs.package = with pkgs; (
(emacsPackagesFor emacs-pgtk).emacsWithPackages (
epkgs: [ epkgs.vterm ]
)
);
# Some packages have characters like + that Nix considers a syntax error.
# To fix this, write the package name in quotes and specify the package set, even if using with epkgs;.
# For example, use epkgs."ido-completing-read+".
Note that if the expression (emacsPackagesFor emacs-pgtk)
is present, emacs-pgtk
need not be listed separately in the list environment.systemPackages
. Indeed, if one does that, nixos-rebuild
will warn about link collisions when the configuration is rebuilt.
Tree-sitter
Emacs 29 supports Tree-sitter parsers when built with the --with-tree-sitter
option. The emacsPackages.treesit-grammars
fake package makes them accessible to Emacs when using emacs29.pkgs.withPackages
:[2]
{
pkgs ? import <nixpkgs> { },
}:
pkgs.emacs29.pkgs.withPackages (epkgs: [
(epkgs.treesit-grammars.with-grammars (grammars: [ grammars.tree-sitter-bash ]))
])
When using Emacs with tree-sitter support, it's recommended to install both epkgs.tree-sitter-langs
and epkgs.treesit-grammars
. While treesit-grammars
handles the registration of grammars with Emacs's native tree-sitter interface, the actual grammar files will come from tree-sitter-langs
. tree-sitter-langs
being a MELPA package means it receives regular updates when new grammar versions are released, whereas the grammars in the tree-sitter-grammars package may lag behind in nixpkgs. The combination ensures you get both up-to-date grammars and proper integration with Emacs's built-in tree-sitter support.
Bonus Tip:
emacs.pkgs.pretty-sha-path
is quality of life improvement for Nix, Guix users.
Allows toggling Guix/Nix store paths by replacing SHA-sequences with ellipsis, i.e.:
/gnu/store/72f54nfp6g1hz873w8z3gfcah0h4nl9p-foo-0.1 → /gnu/store/…-foo-0.1
/nix/store/nh4n4yzb1bx7nss2rg342dz44g14m06x-bar-0.2 → /nix/store/…-bar-0.2
located at https://github.com/alezost/pretty-sha-path.el
Automatic Package Management
If you use use-package
or leaf
in your configuration, the community overlay can manage your Emacs packages automatically by using emacsWithPackagesFromUsePackage
. First, install the overlay (instructions above), then add the following to your configuration.nix
:
{
environment.systemPackages = [
(pkgs.emacsWithPackagesFromUsePackage {
package = pkgs.emacsGit; # replace with pkgs.emacsPgtk, or another version if desired.
config = path/to/your/config.el;
# config = path/to/your/config.org; # Org-Babel configs also supported
# Optionally provide extra packages not in the configuration file.
extraEmacsPackages = epkgs: [
epkgs.use-package
];
# Optionally override derivations.
override = epkgs: epkgs // {
somePackage = epkgs.melpaPackages.somePackage.overrideAttrs(old: {
# Apply fixes here
});
};
})
];
}
See the overlay README for a full list of options.
Adding packages from outside ELPA/MELPA
Some packages may require more sophisticated derivation, but the following is a good starting point for adding external packages:
{
melpaBuild,
fetchFromGitHub,
all-the-icons,
}:
melpaBuild {
pname = "lambda-line";
version = "0-unstable-2022-11-23";
src = fetchFromGitHub {
owner = "Lambda-Emacs";
repo = "lambda-line";
rev = "22186321a7442f1bd3b121f739007bd809cb38f8";
hash = "sha256-2tOXMqpmd14ohzmrRoV5Urf0HlnRPV1EVHm/d8OBSGE=";
};
# elisp dependencies
packageRequires = [
all-the-icons
];
}
You can then use the new package with automatic package management like so:
{
environment.systemPackages = [
(pkgs.emacsWithPackagesFromUsePackage {
...
override = epkgs: epkgs // {
lambda-line = callPackage ./lambda-line.nix {
inherit (pkgs) fetchFromGitHub;
inherit (epkgs) melpaBuild all-the-icons;
};
};
})
];
}
or manual package management like so:
{
environment.systemPackages = with pkgs;
[ ...
((emacsPackagesFor emacs-pgtk).emacsWithPackages (epkgs: [
epkgs.vterm
(callPackage ./lambda-line.nix {
inherit (pkgs) fetchFromGitHub;
inherit (epkgs) melpaBuild all-the-icons;
};)
]))
...
];
}
Packaging and testing Emacs nixpkgs
Emacs packages can be defined and tested like other nixpkgs. They can be obtained from melpa, elpa or other sources such as github.
{ melpaBuild
, lib
, fetchFromGitHub
...
}:
melpaBuild {
pname = "...";
version = "...";
src = fetchFromGitHub {
owner = "...";
repo = "...";
rev = "...";
hash = "...";
};
packageRequires = [ ... ];
patches = [ ... ];
meta = {
description = "...";
license = lib.licenses.gpl3Plus;
};
}
They are located at pkgs/applications/editors/emacs/elisp-packages/manual-packages/
[2] and a new pkg must be added under pkgs/applications/editors/elisp-packages/manual-packages.nix
[3]. Once the nixpkg is ready, it can be tested using the following command. This inserts the nixpkg into the load-path of Emacs.
$ nix-shell -I nixpkgs=<path_to_nixpkgs_copy> -p "(emacsPackagesFor pkgs.emacs28).emacsWithPackages (epkgs: [ epkgs.<package> ])"
Window Manager Integration
Out of the box, non-"Mac Port" versions of Emacs will not be picked up properly by window managers like Yabai because Emacs does not set the correct macOS window role. This can be fixed with a patch (e.g. the first patch in the example above). However, even with the patch, Yabai may not correctly pick up Emacs if you invoke the emacs
binary directly from a shell. For Emacs to work properly with window managers you must invoke it by running the macOS app that is generated when you install Emacs with nix. You can setup an alias to do this like so (replace pkgs.emacs
with the package you are using):
programs.zsh = {
enable = true;
shellAliases = {
emacs = "${pkgs.emacs}/Applications/Emacs.app/Contents/MacOS/Emacs";
};
};
Available Emacs Variants
Stable (nixpkgs)
Emacs is available in nixpkgs under the names emacs
and emacs-gtk
.
Since 2022-09, the package called emacs
now installs the lucid toolkit instead of gtk. The reason is that Emacs is less stable with gtk especially in daemon mode. However, the lucid flavor of Emacs will not take into account the GTK theme (since it is not even GTK) and looks quite… ugly (see comparisons here). If you still prefer the GTK version of Emacs, you can instead install emacs-gtk
(before 2022-09 this package does not exist and Emacs defaults to the gtk version).
Unstable (community overlay)
The community overlay provides nightly versions of the Emacs unstable branches, ELPA/MELPA packages, and EXWM + its dependencies. To use these, first apply the overlay (instructions below), which will make the packages available in nixpkgs. Then you can follow the normal nixpkgs installation instructions (above), but use your package of choice from the overlay (e.g. pkgs.emacsGit
) in place of pkgs.emacs
. See the README for a complete list of packages provided, and their differences.
With flakes
Using a system flake, one can specify the specific revision of the overlay as a flake input, for example:
inputs.emacs-overlay.url = "github:nix-community/emacs-overlay/da2f552d133497abd434006e0cae996c0a282394";
This can then be used in the system configuration by using the self
argument:
nixpkgs.overlays = [ (import self.inputs.emacs-overlay) ];
Without flakes
For installing one of the unstable branches of Emacs, add the following lines to your configuration file:
{
nixpkgs.overlays = [
(import (builtins.fetchGit {
url = "https://github.com/nix-community/emacs-overlay.git";
ref = "master";
rev = "bfc8f6edcb7bcf3cf24e4a7199b3f6fed96aaecf"; # change the revision
}))
];
}
Darwin (macOS)
Nixpkgs provides several of the "Mac Port" versions of Emacs, which have been patched to provide better integration with macOS (see the NixOS manual entry for a full list of packages). However, those packages typically track the stable releases of Emacs.
If you would like to use the latest version of Emacs on Darwin, one option is to use a package like emacsPgkt
from the community overlay (see above), and apply patches yourself via an override. For example, here is a derivation that applies the patches from the emacs-plus
homebrew formula:
pkgs.emacsPgtk.overrideAttrs (old: {
patches =
(old.patches or [])
++ [
# Fix OS window role (needed for window managers like yabai)
(fetchpatch {
url = "https://raw.githubusercontent.com/d12frosted/homebrew-emacs-plus/master/patches/emacs-28/fix-window-role.patch";
sha256 = "0c41rgpi19vr9ai740g09lka3nkjk48ppqyqdnncjrkfgvm2710z";
})
# Enable rounded window with no decoration
(fetchpatch {
url = "https://raw.githubusercontent.com/d12frosted/homebrew-emacs-plus/master/patches/emacs-29/round-undecorated-frame.patch";
sha256 = "111i0r3ahs0f52z15aaa3chlq7ardqnzpwp8r57kfsmnmg6c2nhf";
})
# Make Emacs aware of OS-level light/dark mode
(fetchpatch {
url = "https://raw.githubusercontent.com/d12frosted/homebrew-emacs-plus/master/patches/emacs-28/system-appearance.patch";
sha256 = "14ndp2fqqc95s70fwhpxq58y8qqj4gzvvffp77snm2xk76c1bvnn";
})
];
});
};
}
Troubleshooting
Plasma taskbar grouping
To fix/workaround Plasma grouping Emacs incorrectly (confusing emacs.desktop with emacsclient.desktop), perform the following:
- Open Emacs
- Right click title bar
- More Actions > Configure Special Window Settings
- Add Property > Desktop File Name
- Set desktop file name to "/home/<USERNAME>/.nix-profile/share/applications/emacs.desktop"
- Apply the changes
- Restart Emacs if need
All Emacs instances should now be grouped together, allowing you to pin it and reliably switch to it with Super+<number>
Spell checking
Because Emacs expects the dictionaries to be on the same directory as aspell, they won't be picked up. To fix it install the aspellWithDicts
package, specifying the dictionaries you want to use:
{
environment.systemPackages = with pkgs; [
(aspellWithDicts (dicts: with dicts; [ en en-computers en-science es]))
];
}
A list of official dictionaries for aspell can be found on Aspell Website
See also
- Home Manager – For declarative Emacs configuration at the user level: Emacs module in Home Manager
- Emacs Manuals – Official Emacs documentation.
- NixOS options for Emacs services – System-level Emacs configuration.
- Emacs discussions on NixOS Discourse – Community tips, troubleshooting, and use cases.
- Doom Emacs – A popular Emacs configuration framework.
- Emacs Overlay on Nixpkgs – For nightly builds and additional Emacs packages.