NixOS on ARM/Orange Pi Zero Plus2 H5: Difference between revisions

(2 intermediate revisions by 2 users not shown)

Line 13:

|-

!Bootloader

|Upstream u-boot<ref>https://github.com/NixOS/nixpkgs/pull/47187</ref>

|[https://hydra.nixos.org/job/nixpkgs/trunk/ubootOrangePiZeroPlus2H5.aarch64-linux Upstream u-boot]<ref>https://github.com/NixOS/nixpkgs/pull/47187</ref>

|-

!Maintainer

|~~[[User:samueldr|samueldr]]~~

|

|}

</div>

Line 29:

First follow the [[NixOS_on_ARM#Installation|generic installation steps]] to get the installer image on an SD card.

U-Boot needs to be copied to specific sectors on the microSD card with <code>dd</code>. Download u-boot for the board ~~(<code>uboot-orangepi_zero_plus2_defconfig-2018.09.nixpkgs.*.u-boot-sunxi-with-spl.bin</code>)~~, and copy it to the correct location with (again, replace <code>/dev/sdX</code> with the correct path to the SD card device):

U-Boot needs to be copied to specific sectors on the microSD card with <code>dd</code>. Download u-boot for the board, and copy it to the correct location with (again, replace <code>/dev/sdX</code> with the correct path to the SD card device):

<syntaxhighlight lang="bash">sudo dd if=~~uboot-orangepi_zero_plus2_defconfig-2018.09.nixpkgs.*.~~u-boot-sunxi-with-spl.bin of=/dev/sdX bs=1024 seek=8</syntaxhighlight>

<syntaxhighlight lang="bash">sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=1024 seek=8</syntaxhighlight>

Then, install using the [[NixOS_on_ARM#NixOS_installation_.26_configuration|installation and configuration steps]].

Line 58:

== Resources ==

* [http://www.orangepi.org/~~OrangePiZeroPlus2~~/ Official product page]

* [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html Official product page]

* [http://linux-sunxi.org/Xunlong_Orange_Pi_Zero_Plus_2 linux-sunxi wiki page]

@@ Line 13: / Line 13: @@
 |-
 !Bootloader
-|Upstream u-boot<ref>https://github.com/NixOS/nixpkgs/pull/47187</ref>
+|[https://hydra.nixos.org/job/nixpkgs/trunk/ubootOrangePiZeroPlus2H5.aarch64-linux Upstream u-boot]<ref>https://github.com/NixOS/nixpkgs/pull/47187</ref>
 |-
 !Maintainer
-|[[User:samueldr|samueldr]]
+|
 |}
 </div>
@@ Line 29: / Line 29: @@
 First follow the [[NixOS_on_ARM#Installation|generic installation steps]] to get the installer image on an SD card.
-U-Boot needs to be copied to specific sectors on the microSD card with <code>dd</code>. Download u-boot for the board (<code>uboot-orangepi_zero_plus2_defconfig-2018.09.nixpkgs.*.u-boot-sunxi-with-spl.bin</code>), and copy it to the correct location with (again, replace <code>/dev/sdX</code> with the correct path to the SD card device):
+U-Boot needs to be copied to specific sectors on the microSD card with <code>dd</code>. Download u-boot for the board, and copy it to the correct location with (again, replace <code>/dev/sdX</code> with the correct path to the SD card device):
-<syntaxhighlight lang="bash">sudo dd if=uboot-orangepi_zero_plus2_defconfig-2018.09.nixpkgs.*.u-boot-sunxi-with-spl.bin of=/dev/sdX bs=1024 seek=8</syntaxhighlight>
+<syntaxhighlight lang="bash">sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=1024 seek=8</syntaxhighlight>
 Then, install using the [[NixOS_on_ARM#NixOS_installation_.26_configuration|installation and configuration steps]].
@@ Line 58: / Line 58: @@
 == Resources ==
-* [http://www.orangepi.org/OrangePiZeroPlus2/ Official product page]
+* [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html Official product page]
 * [http://linux-sunxi.org/Xunlong_Orange_Pi_Zero_Plus_2 linux-sunxi wiki page]