Maddy

From NixOS Wiki
Revision as of 13:59, 25 April 2023 by imported>Onny

Maddy is a composable, modern mail server written in Go. It includes everything required to manage users, inboxes, send and receive mails while supporting all important secure protocols and standards.

Installation

Warning: Following example describes the usage of an experimental module which is still being reviewed as an open PR and might not be ready for production.

The following example enables the Maddy mail server listening on mail delivery SMTP/Submission ports (25, 587) and IMAP/IMAPS ports (143, 993) for mail clients to connect to. The server is configured to send and receive TLS-encrypted mails for the primary domain example.org. Mailboxes for the accounts postmaster@example.org and user1@example.org get created if they don't exist yet.

 
/etc/nixos/configuration.nix
services.maddy = {
  enable = true;
  openFirewall = true;
  primaryDomain = "example.org";
  tls = {
    loader = "file";
    certPaths = [ "/var/lib/acme/example.org/example.org.crt" ];
    keyPaths = [ "/var/lib/acme/example.org/example.org.key" ];
  };
  imap = {
    port = 143;
    tlsEnable = true;
    tlsPort = 993;
  };
  ensureAccounts = [
    "user1@example.org"
    "postmaster@example.org"
  ];
  ensureCredentials = {
    # Do not use this in production. This will make passwords world-readable
    # in the Nix store
    "user1@example.org".passwordFile = "${pkgs.writeText "postmaster" "test"}";
    "postmaster@example.org".passwordFile = "${pkgs.writeText "postmaster" "test"}";
  };
};

TLS certificates can be obtained by using services like certbot or the ACME service. Please reference their documentation on how to configure them to acquire the certificates.

In case of using the acme service, grant the maddy service read permissions for the certificates by adding it to the corresponding group

 
/etc/nixos/configuration.nix
systemd.services.maddy.serviceConfig.SupplementaryGroups =
  [ config.security.acme.certs."example.org".group ];

For other clients such as certbot, add it to the acme group

 
/etc/nixos/configuration.nix
systemd.services.maddy.serviceConfig.SupplementaryGroups = [ "acme" ];

Configuration

DNS records

It is possibly easier to configure our own authoritative-only DNS server, which provides important setup information to other mail servers and clients. For details about the meaning of the specific DNS records or manual setup instructions see the Maddy setup tutorial.

 
/etc/nixos/configuration.nix
services.nsd = {
  enable = true;
  interfaces = [
    "0.0.0.0"
    "::"
  ]; 
  zones."example.org.".data = let
    domainkey = ''
      v=DKIM1; k=rsa; p=${
        lib.fileContents( /var/lib/maddy/dkim_keys/example.org_default.dns )}'';
    segments = ((lib.stringLength domainkey) / 255);
    domainkeySplitted = map (x: lib.substring (x*255) 255 domainkey) (lib.range 0 segments);
  in ''
    @ SOA ns.example.org noc.example.org 666 7200 3600 1209600 3600
    @ A 1.2.3.4
    @ AAAA abcd::eeff
    @ MX 10 mx1
    mx1 A 1.2.3.4
    mx1 AAAA abcd::eeff
    @ TXT "v=spf1 mx ~all"
    mx1 TXT "v=spf1 mx ~all"
    _dmarc TXT "v=DMARC1; p=quarantine; ruf=mailto:postmaster@example.org
    _mta-sts TXT "v=STSv1; id=1"
    _smtp._tls TXT "v=TLSRPTv1;rua=mailto:postmaster@example.org"
    default._domainkey TXT "${lib.concatStringsSep "\" \"" domainkeySplitted}"
  '';
};

Update the IPv4 and IPv6 addresses after A and AAAA to the one which points to the publc IP addresses of your mail server. The last entry is used by the DKIM authentication mechanism which enables recipients to verify the authenticity of mails send by your server. They key is read from the file generated by Maddy on the first startup at /var/lib/maddy/dkim_keys/example.org_default.dns and spitted in segments of 255 chars length to fulfill the DNS record requirements.

Now that your server also runs a DNS daemon besides the mail server, you have to configure it as the external nameserver of your domain example.org. Please consult your domain provider on how to do that.

rDNS

It is important that the public facing IP of your mail server resolves to the MX domain name. This is something you would normally configure on your server provider site. You can check if it's resolving correctly by running this command

# nix shell nixpkgs#bind --command dig -x 1.2.3.4
[...]
;; ANSWER SECTION:
1.2.3.4.in-addr.arpa. 6244	IN	PTR	mx1.example.org.

Replace the IP 1.2.3.4 with the IP of your mail server.

MTA-STS & DANE

MTA-STS enforces secure TLS configuration for servers which support this standard. We already advertised this feature in the DNS records above, but we also have to serve a static configuration file using a web server. We use the web server Caddy to do this but of course you can .

 
/etc/nixos/configuration.nix
caddy = {
  enable = true;
  virtualHosts."mta-sts.example.org".extraConfig = ''
    encode gzip
    file_server
    root * ${
      pkgs.runCommand "testdir" {} ''
        mkdir -p "$out/.well-known"
        echo "
          version: STSv1
          mode: enforce
          max_age: 604800
          mx: mx1.example.org
        " > "$out/.well-known/mta-sts.txt"
      ''
    }
  '';
};

Replace the domain mta-sts.example.org and the domain mx1.example.org with the ones you're using.

Using a TLSA (DANE) record is recommended to bind TLS-certificates to a server. You can generate the key using following command

# nix shell nixpkgs#hash-slinger --command tlsa  --create --selector 1 --protocol tcp -p 25 --create mx1.example.org

Your nameserver needs DNSSEC support for it. Add the key to a new TLSA record in your nameserver

 
/etc/nixos/configuration.nix
services.nsd.zones."example.org.".data = ''
  [...]
  _25._tcp.mx1.example.org. TLSA 3 1 1 7f59d873a70e224b184c95a4eb54caa9621e47d48b4a25d312d83d96e3498238
'';

Managing users and inboxes

Creating credentials and inboxes for a specific account. The first command creates the user postmaster@example.org and will prompt for a password.

# maddyctl creds create postmaster@example.org
# maddyctl imap-acct create postmaster@example.org

Change password of an existing account

# maddyctl creds password postmaster@example.org

Spam filtering

You can enable and use rspamd spam filtering daemon like this

 
/etc/nixos/configuration.nix
{ options, lib, ... }: {

services.rspamd.enable = true;

services.maddy.config = builtins.replaceStrings ["msgpipeline local_routing {"] [''msgpipeline local_routing {
  check {
    rspamd {
      api_path http://localhost:11334
    }
  }''] options.services.maddy.config.default;

[...]

The second part in this example replaces a part in the default config of the Maddy module and inserts the rspamd check to the message pipeline as described in the upstream documentation.

Tipps & tricks

Test mail server

You can use several online tools to test your mail server configuration:

  • en.internet.nl/test-mail: Test your mail server configuration for validity and security.
  • mail-tester.com: Send a mail to this service and get a rating about the "spaminess" of your mail server.
  • Send a mail to the echo server echo@univie.ac.at. You should receive a response containing your message in several seconds.

Autoconfig

Since Maddy does not support this feature yet, you can run an additional web service which provides autoconfig or autodiscover files for various mail clients like Thunderbird, iOS Mail or Outlook, so you don't have to manually configure your server settings into these apps. In this example, we're going to tell the clients, that our mail server is running on the domain example.org and which IMAP/SMTP ports to use

 
/etc/nixos/configuration.nix
services.go-autoconfig = {
  enable = true;
  settings = {
    service_addr = ":1323";
    domain = "autoconfig.example.org";
    imap = {
      server = "example.org";
      port = 993;
    };
    smtp = {
      server = "example.org";
      port = 587;
    };
  };
};

After that the autoconfig service based on program go-autoconfig will listen on http://localhost:1323 , serving the configuration informations used by the clients.

You can use your preferred web server, for example Caddy to proxy this service to an outside facing domain like https://autoconfig.example.org

 
/etc/nixos/configuration.nix
caddy = {                                  
  enable = true;                                              
  virtualHosts."autoconfig.example.org".extraConfig = ''
    reverse_proxy http://localhost:1323              
  '';             
};

Further we need to add an additional DNS record to the nsd service to get Outlook and Thunderbird working:

 
/etc/nixos/configuration.nix
services.nsd.zones."example.org.".data = ''
  [...]
  _autodiscover._tcp SRV 0 0 443 autoconfig
'';

Of course autoconfig.example.org domain should point to your server running the SSL enabled web service.

See also