Incus

Incus is a next generation system container and virtual machine manager. It is a community driven alternative to Canonical's LXD, keeping the Apache-2.0 license.

This document aims to provide NixOS specific information related to Incus. For non-NixOS specific documentation, please see the upstream documentation: https://linuxcontainers.org/incus/docs/main/

Installation

The service can be enabled and started by adding the service to your NixOS configuration. It must still be initialized.

virtualisation.incus.enable = true;

To provide non-root access to the Incus server, you will want to add your user to the incus-admin group. Don't forget to logout and log back in.

users.users.YOUR_USERNAME.extraGroups = ["incus-admin"];

You should now be able to use the incus client to talk to the server.

[root@nixos:/etc/nixos]# incus version
If this is your first time running Incus on this machine, you should also run: incus admin init
To start your first container, try: incus launch images:ubuntu/22.04
Or for a virtual machine: incus launch images:ubuntu/22.04 --vm

Client version: 6.0.0
Server version: 6.0.0

Initialization

As you can see in the above code block, adding the Incus service will provide a working instance of the server, but is not sufficient on its own to have a complete setup.

For more complex setups, please refer to https://linuxcontainers.org/incus/docs/main/howto/initialize/

Minimal

The simplest way to initialize, Incus will provide a basic directory backed storage pool and a bridged NAT network with DHCP.

incus admin init --minimal

Preseed

NixOS has an option for providing a preseed to Incus, as documented in the initialize link above. This is a declarative initialization, with the caveat that Incus preseed will never remove a resource created. Here is an example that is similar to the Minimal initialization option.

virtualisation.incus.preseed = {
  networks = [
    {
      config = {
        "ipv4.address" = "10.0.100.1/24";
        "ipv4.nat" = "true";
      };
      name = "incusbr0";
      type = "bridge";
    }
  ];
  profiles = [
    {
      devices = {
        eth0 = {
          name = "eth0";
          network = "incusbr0";
          type = "nic";
        };
        root = {
          path = "/";
          pool = "default";
          size = "35GiB";
          type = "disk";
        };
      };
      name = "default";
    }
  ];
  storage_pools = [
    {
      config = {
        source = "/var/lib/incus/storage-pools/default";
      };
      driver = "dir";
      name = "default";
    }
  ];
};

Networking/Firewall

When using Incus on NixOS, nftables is required to ensure broadest compatibility with other services that manage firewall rules from release 24.05. Trying to use iptables will fail eval, and this can be fixed by switching to nftables and for simple firewalls should be a drop-in replacement for iptables.

networking.nftables.enable = true;

By default the NixOS firewall will block DHCP requests to the Incus network, meaning instances will not get an IPv4 address. Ensure you allow 53 for DNS and 67 for DHCPv4 on any Incus bridge network interfaces. This interface name should match the name given during initialization or configured through the incus interfaces.

networking.firewall.interfaces.incusbr0.allowedTCPPorts = [
  53
  67
];
networking.firewall.interfaces.incusbr0.allowedUDPPorts = [
  53
  67
];

OR, the entire intreface can be trusted.

networking.firewall.trustedInterfaces = [ "incusbr0" ];

NixOS Instances

To launch a new NixOS container use the following command.

incus launch images:nixos/unstable nixos -c security.nesting=true

A NixOS virtual machine is launched with the following.

incus launch --vm images:nixos/unstable nixos -c security.secureboot=false

NixOS Images

Pre-built Images

NixOS images are available at https://images.linuxcontainers.org/ providing VM and Container images for both stable and unstable NixOS.

[root@nixos:/etc/nixos]# incus image list images:nixos
+-------------------------------+--------------+--------+---------------------------------------+--------------+-----------------+-----------+----------------------+
|             ALIAS             | FINGERPRINT  | PUBLIC |              DESCRIPTION              | ARCHITECTURE |      TYPE       |   SIZE    |     UPLOAD DATE      |
+-------------------------------+--------------+--------+---------------------------------------+--------------+-----------------+-----------+----------------------+
| nixos/23.11 (3 more)          | 1e606df4d91a | yes    | Nixos 23.11 amd64 (20240521_01:02)    | x86_64       | CONTAINER       | 124.84MiB | 2024/05/21 00:00 UTC |
+-------------------------------+--------------+--------+---------------------------------------+--------------+-----------------+-----------+----------------------+
| nixos/23.11 (3 more)          | a96494ff3c46 | yes    | Nixos 23.11 amd64 (20240521_01:02)    | x86_64       | VIRTUAL-MACHINE | 452.43MiB | 2024/05/21 00:00 UTC |

Creation

Container and VM images are built by Hydra as part of the NixOS release.

https://hydra.nixos.org/job/nixos/trunk-combined/nixos.lxdContainerImage.x86_64-linux

https://hydra.nixos.org/job/nixos/trunk-combined/nixos.lxdVirtualMachineImage.x86_64-linux

The LXC Image Server then consumes them and repackages them using their CI.

Definition: https://github.com/lxc/lxc-ci/blob/main/jenkins/jobs/image-nixos.yaml

CI: https://jenkins.linuxcontainers.org/job/image-nixos/

Custom Images

All the necessary build infrastructure exists in nixpkgs to build custom images.

Define some NixOS systems.

nixosConfigurations = {
  container = inputs.nixpkgs.lib.nixosSystem {
    system = "x86_64-linux";
    modules = [
      "${inputs.nixpkgs}/nixos/modules/virtualisation/lxc-container.nix"
      (
        { pkgs, ... }:
        {
          environment.systemPackages = [ pkgs.vim ];
        }
      )
    ];
  };

  vm = inputs.nixpkgs.lib.nixosSystem {
    system = "x86_64-linux";
    modules = [
      "${inputs.nixpkgs}/nixos/modules/virtualisation/lxd-virtual-machine.nix"
      (
        { pkgs, ... }:
        {
          environment.systemPackages = [ pkgs.vim ];
        }
      )
    ];
  };
};

Then you can build the image and associated metadata.

# nix build .#nixosConfigurations.container.config.system.build.squashfs --print-out-paths
/nix/store/24djf2qlpkyh29va8z6pxrqp8x5z6xyv-nixos-lxc-image-x86_64-linux.img

# nix build .#nixosConfigurations.container.config.system.build.metadata --print-out-paths
/nix/store/2snjw9y8brfh5gia44jv6bhdhmmdydva-tarball

# nix build .#nixosConfigurations.vm.config.system.build.qemuImage --print-out-paths
/nix/store/znk28bp34bycb3h5k0byb61bwda23q5l-nixos-disk-image

# nix build .#nixosConfigurations.vm.config.system.build.metadata --print-out-paths
/nix/store/2snjw9y8brfh5gia44jv6bhdhmmdydva-tarball

Finally, the image can be imported into an Incus storage pool and used to launch instances.

# incus image import --alias nixos/custom/container /nix/store/2snjw9y8brfh5gia44jv6bhdhmmdydva-tarball/tarball/nixos-system-x86_64-linux.tar.xz /nix/store/24djf2qlpkyh29va8z6pxrqp8x5z6xyv-nixos-lxc-image-x86_64-linux.img
Image imported with fingerprint: 9d0d6f3df0cccec4da7ce4f69952bd389b6dd655fd9070e498f591aaffbb2cda

# incus image list nixos/custom/container
+------------------------+--------------+--------+--------------------------------------------------+--------------+-----------+-----------+----------------------+
|         ALIAS          | FINGERPRINT  | PUBLIC |                   DESCRIPTION                    | ARCHITECTURE |   TYPE    |   SIZE    |     UPLOAD DATE      |
+------------------------+--------------+--------+--------------------------------------------------+--------------+-----------+-----------+----------------------+
| nixos/custom/container | 9d0d6f3df0cc | no     | NixOS Uakari 24.05.20240513.a39a12a x86_64-linux | x86_64       | CONTAINER | 170.31MiB | 2024/05/21 09:21 EDT |
+------------------------+--------------+--------+--------------------------------------------------+--------------+-----------+-----------+----------------------+

# incus launch nixos/custom/container -c security.nesting=true
Launching the instance
Instance name is: square-heron

# incus shell square-heron

[root@nixos:~]# which vim
/run/current-system/sw/bin/vim