Hardware/Razer

← Back to Hardware Hub

OpenRazer

OpenRazer is an open-source project to support Razer peripherals, including those found in their laptops. To enable the OpenRazer you need to add the following to your configuration.nix

  hardware.openrazer.enable = true;
  environment.systemPackages = with pkgs; [
      openrazer-daemon
   ];

To run the openrazer-daemon, you need to be in the openrazer group.

users.users.<username> = { extraGroups = [ "openrazer" ]; };

To enable a front-end to control the peripherals, add the following to your configuration

  environment.systemPackages = with pkgs; [
      polychromatic
  ];

Razer Blade 15 Advanced (Early 2020 model)

Lid reopen hybernate issue

Upon closing the lid to the laptop and reopening, an issue occurs where the device will intermittently go back into hybernate mode after around 10-30 seconds. Setting the kernel parameter button.lid_init_state=open fixes this issue. The following is an example configuration (working in NixOS 22.05):

  boot.kernelParams = [ "button.lid_init_state=open" ];

Getting the Nvidia card to work properly with external displays

In order to get both the laptop display and external displays working, in the BIOS settings set Chipset > GPU MODE to "Dedicated GPU only".

After setting the GPU MODE to "Dedicated GPU only" in the BIOS, enabling Nvidia is necessary in order for both the laptop's display and external display/ports to work properly. Here is an example configuration snippet for NixOS 22.05:

  services.xserver = {
    videoDrivers = [ "nvidia" ];
  };
  hardware.opengl.enable = true;
  hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.beta;
  
  hardware.nvidia = {
    powerManagement.enable = true;
    modesetting.enable = true;
    prime = {
      sync.enable = true;
      nvidiaBusId = "PCI:1:0:0";
      intelBusId = "PCI:0:2:0";
    };
  };

Additional Resources

https://discourse.nixos.org/t/razer-blade-15-nvidia-integrated-graphics-on-nixos-issues/23576/6

https://www.reddit.com/r/NixOS/comments/nuclde/how_to_properly_set_up_lidclose_behaviour_on_a/

https://wiki.archlinux.org/title/Razer_Blade

Updating your system to use the unstable drivers and daemon

If you are using a new model from razer it probably is not available in the stable packages. But it might be available in the unstable ones.

In your configuration.nix file:

 nixpkgs.config = {
    allowUnfree = true;

    packageOverrides = pkgs: {
      stable = import <nixos-stable> {config = config.nixpkgs.config;};
      unstable = import (fetchTarball "https://github.com/NixOS/nixpkgs/archive/nixos-unstable.tar.gz") { config = config.nixpkgs.config; };
    };
  };

# updates the whole kernel to unstable so you have the correct drivers.
boot.kernelPackages = pkgs.unstable.linuxPackages;

# overrides the openrazer-daemon that the harware.openrazer.enable starts
  nixpkgs.overlays = [
    (final: prev: {
      openrazer-daemon = pkgs.unstable.openrazer-daemon;
    })
  ];

  environment.systemPackages = with pkgs; [
    unstable.polychromatic
# alternatively
#    unstable.razergenie
  ];

USB disable Issues

If you are encountering issues that your Razer keyboard does light up on boot shortly and then can not be found by the open-razer-daemon until you unplug your USB cable and re-plug it. Then you might want to reset your USB on startup so that after login the daemon finds it again.

  # Razer usb reset. Since it disables somehow on boot.
  systemd.services."usb-reset" = {
    description = "Resets usb port for my Razer Keyboard";
    after = ["multi-user.target"];
    serviceConfig = {
        User = "root";
        Type = "simple";
        ExecStart=pkgs.writeShellScript "unit-restart-usb7_3" ''
          echo '7-3' |tee /sys/bus/usb/drivers/usb/unbind
          echo '7-3' |tee /sys/bus/usb/drivers/usb/bind
        '';
        KillMode = "process";
        Restart = "on-failure";
    };
    wantedBy = ["graphical.target"];
  };

  systemd.services."usb-reset".enable = true;

7-3 is the Bus: 7 and the Port: 3

How to figure those out you can read here:

https://superuser.com/questions/1707773/how-to-turn-usb-connected-device-on-and-off-in-linux

If that does not work, you can reset all usb controllers instead:

https://unix.stackexchange.com/questions/704341/how-to-reset-usb-controllers

  # Razer usb reset. Since it disables somehow on boot.
  systemd.services."usb-reset" = {
    description = "Resets usb port for my Razer Keyboard";
    after = ["multi-user.target"];
    serviceConfig = {
        User = "root";
        Type = "simple";
        ExecStart=pkgs.writeShellScript "unit-restart-usb-controller" ''
          #!/usr/bin/env bash
          # Resets all USB host controllers of the system.
          # This is useful in case one stopped working
          # due to a faulty device having been connected to it.

          base="/sys/bus/pci/drivers"
          sleep_secs="1"

          # This might find a sub-set of these:
          # * 'ohci_hcd' - USB 3.0
          # * 'ehci-pci' - USB 2.0
          # * 'xhci_hcd' - USB 3.0
          echo "Looking for USB standards ..."
          for usb_std in "$base/"?hci[-_]?c*
          do
              echo "* USB standard '$usb_std' ..."
              for dev_path in "$usb_std/"*:*
              do
                  dev="$(basename "$dev_path")"
                  echo "  - Resetting device '$dev' ..."
                  printf '%s' "$dev" | tee "$usb_std/unbind" > /dev/null
                  sleep "$sleep_secs"
                  printf '%s' "$dev" | tee "$usb_std/bind" > /dev/null
                  echo "    done."
              done
              echo "  done."
          done
          echo "done."
        '';
        KillMode = "process";
        Restart = "on-failure";
    };
    wantedBy = ["graphical.target"];
  };

  systemd.services."usb-reset".enable = true;