Hardware/TUXEDO: Difference between revisions

Line 22:

At the time of writing, the Flake interface is still experimental, but is stable enough to use it to import and enable this module in your system configuration.

Here you can find what you should add to your <~~source~~ inline>flake.nix</~~source~~> to install the TCC:

Here you can find what you should add to your <syntaxhighlight inline>flake.nix</syntaxhighlight> to install the TCC:

Line 68:

As noted in an issue on the project's GitHub page<ref>'''Build broken on nixos-unstable #5''', Nov 13, 2022 - https://github.com/blitz/tuxedo-nixos/issues/5</ref>, blitz's TCC distribution is tested exclusively against Nixpkgs 22.11; as such, there might be errors when building it after overriding its Nixpkgs version to a newer one.

To avoid such problems, it can be useful to delete the <~~source~~ lang="nix" inline>inputs.nixpkgs.follows = "nixpkgs";</~~source~~> line in the example above and to specify <~~source~~ lang="nix" inline>hardware.tuxedo-control-center.package = tuxedo-nixos.packages.x86_64-linux.default;</~~source~~> right after the enable instruction. Doing this, in fact, will build the TCC against the Nixpkgs version it is meant to.

To avoid such problems, it can be useful to delete the <syntaxhighlight lang="nix" inline>inputs.nixpkgs.follows = "nixpkgs";</syntaxhighlight> line in the example above and to specify <syntaxhighlight lang="nix" inline>hardware.tuxedo-control-center.package = tuxedo-nixos.packages.x86_64-linux.default;</syntaxhighlight> right after the enable instruction. Doing this, in fact, will build the TCC against the Nixpkgs version it is meant to.

== Tuxedo Keyboard ==

Line 74:

The keyboard installed on some TUXEDO Laptops has a variable color backlight that, once a specific Kernel module is inserted, can be controlled via the TCC (since version 3.2.0 of the module) or via some Kernel commandline parameters (up to version 3.1.4 of the module).

The tuxedo-keyboard module is currently present on Nixpkgs and can easily be enabled by adding the <~~source~~ lang="nix" inline>hardware.tuxedo-keyboard.enable = true;</~~source~~> option to your NixOS configuration. If you are on version 3.2.0 (or later) this one will be the only change that you'll need to do in the configuration, as the backlight control will then be available directly from "Tools" > "Keyboard Backlight" in the Tuxedo Control Center (see above if you haven't installed it yet).

The tuxedo-keyboard module is currently present on Nixpkgs and can easily be enabled by adding the <syntaxhighlight lang="nix" inline>hardware.tuxedo-keyboard.enable = true;</syntaxhighlight> option to your NixOS configuration. If you are on version 3.2.0 (or later) this one will be the only change that you'll need to do in the configuration, as the backlight control will then be available directly from "Tools" > "Keyboard Backlight" in the Tuxedo Control Center (see above if you haven't installed it yet).

[[File:TCC_KeyboardBacklightSettings.png]]

If you installed tuxedo-keyboard 3.1.4 (or older), however, you'll have to add the <~~source~~ inline>tuxedo_keyboard</~~source~~> options to the Kernel commandline by using the <~~source~~ lang="nix" inline>boot.kernelParams;</~~source~~> config key as in the example below:

If you installed tuxedo-keyboard 3.1.4 (or older), however, you'll have to add the <syntaxhighlight inline>tuxedo_keyboard</syntaxhighlight> options to the Kernel commandline by using the <syntaxhighlight lang="nix" inline>boot.kernelParams;</syntaxhighlight> config key as in the example below:

Line 92:

</syntaxHighlight>

More options can be found in the [https://github.com/tuxedocomputers/tuxedo-keyboard/blob/v3.1.4/README.md#kernel-parameter- official <~~source~~ inline>tuxedo_keyboard</~~source~~> docs.]

More options can be found in the [https://github.com/tuxedocomputers/tuxedo-keyboard/blob/v3.1.4/README.md#kernel-parameter- official <syntaxhighlight inline>tuxedo_keyboard</syntaxhighlight> docs.]

== References ==

@@ Line 22: / Line 22: @@
 At the time of writing, the Flake interface is still experimental, but is stable enough to use it to import and enable this module in your system configuration.
-Here you can find what you should add to your <source inline>flake.nix</source> to install the TCC:
+Here you can find what you should add to your <syntaxhighlight inline>flake.nix</syntaxhighlight> to install the TCC:
 <syntaxHighlight lang=nix>
@@ Line 68: / Line 68: @@
 As noted in an issue on the project's GitHub page<ref>'''Build broken on nixos-unstable #5''', Nov 13, 2022 - https://github.com/blitz/tuxedo-nixos/issues/5</ref>, blitz's TCC distribution is tested exclusively against Nixpkgs 22.11; as such, there might be errors when building it after overriding its Nixpkgs version to a newer one.
-To avoid such problems, it can be useful to delete the <source lang="nix" inline>inputs.nixpkgs.follows = "nixpkgs";</source> line in the example above and to specify <source lang="nix" inline>hardware.tuxedo-control-center.package = tuxedo-nixos.packages.x86_64-linux.default;</source> right after the enable instruction. Doing this, in fact, will build the TCC against the Nixpkgs version it is meant to.
+To avoid such problems, it can be useful to delete the <syntaxhighlight lang="nix" inline>inputs.nixpkgs.follows = "nixpkgs";</syntaxhighlight> line in the example above and to specify <syntaxhighlight lang="nix" inline>hardware.tuxedo-control-center.package = tuxedo-nixos.packages.x86_64-linux.default;</syntaxhighlight> right after the enable instruction. Doing this, in fact, will build the TCC against the Nixpkgs version it is meant to.
 == Tuxedo Keyboard ==
@@ Line 74: / Line 74: @@
 The keyboard installed on some TUXEDO Laptops has a variable color backlight that, once a specific Kernel module is inserted, can be controlled via the TCC (since version 3.2.0 of the module) or via some Kernel commandline parameters (up to version 3.1.4 of the module).
-The tuxedo-keyboard module is currently present on Nixpkgs and can easily be enabled by adding the <source lang="nix" inline>hardware.tuxedo-keyboard.enable = true;</source> option to your NixOS configuration. If you are on version 3.2.0 (or later) this one will be the only change that you'll need to do in the configuration, as the backlight control will then be available directly from "Tools" > "Keyboard Backlight" in the Tuxedo Control Center (see above if you haven't installed it yet).
+The tuxedo-keyboard module is currently present on Nixpkgs and can easily be enabled by adding the <syntaxhighlight lang="nix" inline>hardware.tuxedo-keyboard.enable = true;</syntaxhighlight> option to your NixOS configuration. If you are on version 3.2.0 (or later) this one will be the only change that you'll need to do in the configuration, as the backlight control will then be available directly from "Tools" > "Keyboard Backlight" in the Tuxedo Control Center (see above if you haven't installed it yet).
 [[File:TCC_KeyboardBacklightSettings.png]]
-If you installed tuxedo-keyboard 3.1.4 (or older), however, you'll have to add the <source inline>tuxedo_keyboard</source> options to the Kernel commandline by using the <source lang="nix" inline>boot.kernelParams;</source> config key as in the example below:
+If you installed tuxedo-keyboard 3.1.4 (or older), however, you'll have to add the <syntaxhighlight inline>tuxedo_keyboard</syntaxhighlight> options to the Kernel commandline by using the <syntaxhighlight lang="nix" inline>boot.kernelParams;</syntaxhighlight> config key as in the example below:
 <syntaxHighlight lang=nix>
@@ Line 92: / Line 92: @@
 </syntaxHighlight>
-More options can be found in the [https://github.com/tuxedocomputers/tuxedo-keyboard/blob/v3.1.4/README.md#kernel-parameter- official <source inline>tuxedo_keyboard</source> docs.]
+More options can be found in the [https://github.com/tuxedocomputers/tuxedo-keyboard/blob/v3.1.4/README.md#kernel-parameter- official <syntaxhighlight inline>tuxedo_keyboard</syntaxhighlight> docs.]
 == References ==
 <references />