Template:ARM/installation generic: Difference between revisions

From NixOS Wiki
imported>Samueldr
m WIP
imported>KREYREN
Add conv=sync status=progress for better and more reliable output
Line 20: Line 20:
-->To use the generic installation image for your board, you will need to copy it verbatim to {{{storage|an SD card}}}.
-->To use the generic installation image for your board, you will need to copy it verbatim to {{{storage|an SD card}}}.
{{tip|Replace <code>/dev/sdX</code> with the path to your SD card device.}}
{{tip|Replace <code>/dev/sdX</code> with the path to your SD card device.}}
{{#tag:syntaxhighlight|sudo dd if=sd-image-{{{variant}}}-linux.img of=/dev/sdX|lang="bash"}}<!--
{{#tag:syntaxhighlight|sudo dd if=sd-image-{{{variant}}}-linux.img of=/dev/sdX conv=sync status=progress|lang="bash"}}<!--


--></includeonly>
--></includeonly>

Revision as of 18:41, 1 July 2023


This template provides generic installation instructions for NixOS on ARM sub-pages. Look at the other installation instruction templates, there may be one more appropriate for the lineage of your board!

{{ARM/installation generic|variant=EXAMPLE}}

Parameters:

  • variant Pass one of aarch64, armv7l, armv6l as relevant.
  • storage default: an SD card This will be used like ... to a/an EXAMPLE STORAGE DEVICE. Example: storage=a USB drive.

Preview

To use the generic installation image for your board, you will need to copy it verbatim to an SD card.

sudo dd if=sd-image-EXAMPLE-linux.img of=/dev/sdX conv=sync status=progress