NixOS on ARM/Banana Pi

From NixOS Wiki
Revision as of 21:12, 2 April 2019 by imported>NickHu (Add instructions to build and write U-Boot to disk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Building U-Boot

$ git clone git://git.denx.de/u-boot.git
$ cd u-boot
$ nix-shell -p ubootTools gcc-arm-embedded dtc flex bison python swig
$ make -j4 ARCH=arm CROSS_COMPILE=arm-none-eabi- Bananapi_defconfig 
$ make -j4 ARCH=arm CROSS_COMPILE=arm-none-eabi-

Board-specific installation notes

First follow the generic installation steps to get the installer image.

U-Boot needs to be copied to specific sectors on the microSD card with dd: 

sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=1024 seek=8

Then, install using the installation and configuration steps.

Retrieved from "https://wiki.nixos.org/w/index.php?title=NixOS_on_ARM/Banana_Pi&oldid=6682"