Networking

This site provides snippets for configuring your network just right for the use case you are looking for. All configuration is for configuration.nix

IPv6

Prefix delegation with fixed DUID

Sometimes the hosting provider manages ipv6 networks via a so-called DUID or clientid. This snippet is required to make the network routable:

{ config, pkgs, ... }:

let
  # Get this from your hosting provider
  clientid = "00:11:22:33:44:55:66:77:88:99";
  interface = "enp2s0";
  subnet =  "56";
  network = "2001:bbb:3333:1111::/${subnet}";
  own_ip =  "2001:bbb:3333:1111::1/${subnet}";
in {
  # ... snip ...

  networking.enableIPv6 = true;
  networking.useDHCP = true;
  networking.dhcpcd.persistent = true;
  networking.dhcpcd.extraConfig = ''
    clientid "${clientid}"
    noipv6rs
    interface ${interface}
    ia_pd 1/${network} ${interface}
    static ip6_address=${own_ip}
  '';
  environment.etc."dhcpcd.duid".text = clientid;

}

Source: gleber gist for online.net IPv6 config in NixOS

Note: Recent versions of dhcpcd move the duid file to /var/db/dcpcd/duid. For that to work, you have to replace the above environment.etc line with something like:

systemd.services.dhcpcd.preStart = ''
  cp ${pkgs.writeText "duid" "<ID>"} /var/db/dhcpcd/duid
'';

VLAN's

The below is a complete networking example, showing 2 interfaces, 1 with VLAN trunk tagging and 1 without.

eth1 is a normal network interface @ 192.168.1.2, with no VLAN information.

eth0 is the vlan trunk tagged, with 2 VLAN's tagged, vlan 100 and vlan 101.

vlan100 is in the 10.1.1.X network and vlan 101 is in the 10.10.10.X network.

the hostID should be random data, derived from something like:

head -c4 /dev/urandom | od -A none -t x4

see the manual for more information.

Complete networking section example:

    networking = {
	    hostId = "deadb33f";
    	hostName = "nixos";
      domain = "example.com";
      dhcpcd.enable = false;
      usePredictableInterfaceNames = false;
      interfaces.eth1.ipv4.addresses = [{
        address = "192.168.1.2";
        prefixLength = 28;
      }];
	    vlans = {
		    vlan100 = { id=100; interface="eth0"; };
		    vlan101 = { id=101; interface="eth0"; };
		  };
      interfaces.vlan100.ipv4.addresses = [{
        address = "10.1.1.2";
        prefixLength = 24;
      }];
      interfaces.vlan101.ipv4.addresses = [{
        address = "10.10.10.3";
        prefixLength = 24;
      }];
      defaultGateway = "192.168.1.1
      nameservers = [ "1.1.1.1" "8.8.8.8" ];
    };