Serial Console: Difference between revisions

From NixOS Wiki
imported>Clerie
No edit summary
imported>Clerie
No edit summary
 
Line 1: Line 1:
{{expansion}}
{{expansion}}
== Serial devices ==
Serial devices under NixOS will get expose with the following file names.
The file names relate to the driver used for the serial interface.
* <code>/dev/ttyS*</code>
* <code>/dev/ttyUSB*</code>
* <code>/dev/ttyACM*</code>


== Connect to serial device ==
== Connect to serial device ==
Line 21: Line 12:


   screen /dev/ttyS0 115200
   screen /dev/ttyS0 115200
== Serial devices ==
Serial devices under NixOS will get expose with the following file names.
The file names relate to the driver used for the serial interface.
* <code>/dev/ttyS*</code>
* <code>/dev/ttyUSB*</code>
* <code>/dev/ttyACM*</code>


== Use serial interface as TTY ==
== Use serial interface as TTY ==

Latest revision as of 18:34, 17 December 2023

Connect to serial device

Most serial console programs require you to specify a serial device and a baud rate.

With tio

 tio -b 115200 /dev/ttyS0

With screen

 screen /dev/ttyS0 115200

Serial devices

Serial devices under NixOS will get expose with the following file names. The file names relate to the driver used for the serial interface.

  • /dev/ttyS*
  • /dev/ttyUSB*
  • /dev/ttyACM*

Use serial interface as TTY

To use a serial device ttyS0 as a TTY to log into the device, you have to tell the kernel and you boot loader about the serial configuration.

An example for GRUB bootloader:

 boot.kernelParams = [ "console=ttyS0,115200n8" ];
 boot.loader.grub.extraConfig = "
   serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1
   terminal_input serial
   terminal_output serial
 ";

Unprivileged access to serial device

Serial devices under NixOS are created with the group dialout by default.

All users that are part of the group dialout can access serial devices.

Add a user to group dialout:

   users.users.<name>.extraGroups = [ "dialout" ];

Tips

Serial console wrapping

The remote serial console has no knowledge of your local console. This means that it will wrap with safe defaults.

You can configure the columns/rows of your serial console using stty.

In a console sized like yours, e.g. a new tab or tmux window:

$ echo "stty rows $(tput lines) cols $(tput cols)"

This will give you the exact invocation for your current terminal size.

In case tmux is used an alternative is to add the following snippet to the tmux.conf

 bind R run "echo \"stty columns $(tmux display -p \#{pane_width}); stty rows $(tmux display -p \#{pane_height})\" | tmux load-buffer - ; tmux paste-buffer"

In this case fixing the terminal size can be achieved by pressing R.