NixOS on ARM/BeagleBone Black: Difference between revisions
imported>Samueldr m oopsie, copy-paste issue with board name. |
imported>Samueldr Add note about content being out-of-date |
||
| Line 10: | Line 10: | ||
<!-- TODO : write intro paragraph --> | <!-- TODO : write intro paragraph --> | ||
== Status == | == Status == | ||
{{outdated|Section refers to old user-provided images. Should be reviewed with cross-compilation, or native compilation through userspace emulation.}} | |||
'''@dezgeg''''s porting efforts to ARMv7 should work. | '''@dezgeg''''s porting efforts to ARMv7 should work. | ||
Revision as of 22:17, 26 December 2021
| BeagleBone Black | |
|---|---|
| Architecture | ARMv7 |
Status
 |
This article or section is out of date.
Reason: Section refers to old user-provided images. Should be reviewed with cross-compilation, or native compilation through userspace emulation. (Discuss in Talk:NixOS on ARM/BeagleBone Black)
Once the page has been updated this notice can be removed. |
@dezgeg's porting efforts to ARMv7 should work.
Board-specific installation notes
First follow the generic installation steps to get the installer image.
U-Boot and its SPL (called the MLO) need to be copied to specific sectors on the microSD card with dd. Download U-Boot & MLO for the board (uboot-am335x_boneblack_defconfig-2017.03_u-boot.img, uboot-am335x_boneblack_defconfig-2017.03_MLO), and copy them to the correct location with (again, replace /dev/sdX with the correct path to the SD card device):
sudo dd if=uboot-am335x_boneblack_defconfig-2017.03_MLO of=/dev/sdX count=1 seek=1 bs=128k
sudo dd if=uboot-am335x_boneblack_defconfig-2017.03_u-boot.img of=/dev/sdX count=2 seek=1 bs=384k
In case there is a valid boot loader on the eMMC of the board and the NixOS U-Boot isn't getting launched, try holding the button labeled 'S2' when resetting the board. Also the boot ROM might have a size limitation on the microSD cards used for booting; the author wasn't able to get a 64 GB SDXC card working but a 8 GB SDHC card worked.
Then, install using the installation and configuration steps.
Serial console
 |
This article or section needs expansion.
Reason: The exact
console parameter is needed. (Discuss in Talk:NixOS on ARM/BeagleBone Black#)Please consult the pedia article metapage for guidelines on contributing. |
Notes about the boot process
Only serial console (via the 6-pin FTDI pin header) is supported.