Remote disk unlocking: Difference between revisions

Line 107:

</syntaxhighlight>First generate a private und public key pair as mentioned in the WireGuard article. Reference the private key in <code>boot.initrd.secrets</code>, in this exmaple <code>/etc/wireguard/private-key</code>. Put the <code>PublicKey</code> of the remote peer into the <code>wireguardPeers</code> array.

Configure the IP addresses used by your initrd peer (<code>10.250.0.2</code>) and the remote peer (<code>10.250.0.1</code>). Also specify the IP and port of the remote peer in <code>Endpoint</code>, in our example <code>198.51.100.1:51821</code>.

Configure the IP addresses used by your initrd peer (<code>10.250.0.2</code>) and the remote peer (<code>10.250.0.1</code>). Also specify the IP and port of the remote peer in <code>Endpoint</code>, in our example <code>198.51.100.1:51821</code>. The remote peer also needs to know address configuration and the public key of the initrd peer.

Last but not least add the <code>wireguard</code> kernel module to <code>boot.initrd.availableKernelModules</code> beside the module required by your network device.

@@ Line 107: / Line 107: @@
 </syntaxhighlight>First generate a private und public key pair as mentioned in the WireGuard article. Reference the private key in <code>boot.initrd.secrets</code>, in this exmaple <code>/etc/wireguard/private-key</code>. Put the <code>PublicKey</code> of the remote peer into the <code>wireguardPeers</code> array.
-Configure the IP addresses used by your initrd peer (<code>10.250.0.2</code>) and the remote peer (<code>10.250.0.1</code>). Also specify the IP and port of the remote peer in <code>Endpoint</code>, in our example <code>198.51.100.1:51821</code>.
+Configure the IP addresses used by your initrd peer (<code>10.250.0.2</code>) and the remote peer (<code>10.250.0.1</code>). Also specify the IP and port of the remote peer in <code>Endpoint</code>, in our example <code>198.51.100.1:51821</code>. The remote peer also needs to know address configuration and the public key of the initrd peer.
 Last but not least add the <code>wireguard</code> kernel module to <code>boot.initrd.availableKernelModules</code> beside the module required by your network device.