NixOS on ARM/Jetson TK1
| Jetson TK1 | |
|---|---|
| Architecture | ARMv7 |
Status
 |
This article or section is out of date.
Reason: Section refers to old user-provided images. Should be reviewed with cross-compilation, or native compilation through userspace emulation. (Discuss in Talk:NixOS on ARM/Jetson TK1)
Once the page has been updated this notice can be removed. |
@dezgeg's porting efforts to ARMv7 should work.
Board-specific installation notes
The proprietary NVIDIA bootloader can only boot NVIDIA's L4T kernel, so it needs to be replaced by flashing U-Boot on the board's eMMC via the recovery USB port. The easiest way to do that is to use tegra-uboot-flasher-scripts, though unfortunately that's currently not packaged in NixOS. Once U-Boot is flashed, the ARMv7 image will boot out-of-the-box.
To get the ARMv7 image, follow the generic installation steps.
Finally, install using the installation and configuration steps.
Serial console
 |
This article or section needs expansion.
Reason: The exact
console parameter is needed. (Discuss in Talk:NixOS on ARM/Jetson TK1#)Please consult the pedia article metapage for guidelines on contributing. |
Notes about the boot process
Only serial console (via the DB-9 connector) is supported.