Serial Console

This article or section needs expansion.

Reason: This article is a stub. (Discuss in Talk:Serial Console#)
Please consult the pedia article metapage for guidelines on contributing.

Use serial interface as TTY

To use a serial device ttyS0 as a TTY to log into the device, you have to tell the kernel and you boot loader about the serial configuration.

An example for GRUB bootloader:

 boot.kernelParams = [ "console=ttyS0,115200n8" ];
 boot.loader.grub.extraConfig = "
   serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1
   terminal_input serial
   terminal_output serial
 ";

Unprivileged access to serial device

Serial devices under NixOS are created with the group dialout by default.

All users that are part of the group dialout can access serial devices.

Add a user to group dialout:

   users.users.<name>.extraGroups = [ "dialout" ];

Tips

Serial console wrapping

The remote serial console has no knowledge of your local console. This means that it will wrap with safe defaults.

You can configure the columns/rows of your serial console using stty.

In a console sized like yours, e.g. a new tab or tmux window:

$ echo "stty rows $(tput lines) cols $(tput cols)"

This will give you the exact invocation for your current terminal size.

In case tmux is used an alternative is to add the following snippet to the tmux.conf

 bind R run "echo \"stty columns $(tmux display -p \#{pane_width}); stty rows $(tmux display -p \#{pane_height})\" | tmux load-buffer - ; tmux paste-buffer"

In this case fixing the terminal size can be achieved by pressing R.