NixOS on ARM/Jetson TK1

From NixOS Wiki
Revision as of 22:17, 26 December 2021 by imported>Samueldr (Add note about content being out-of-date)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jetson TK1
Architecture ARMv7

Status

@dezgeg's porting efforts to ARMv7 should work.

Board-specific installation notes

The proprietary NVIDIA bootloader can only boot NVIDIA's L4T kernel, so it needs to be replaced by flashing U-Boot on the board's eMMC via the recovery USB port. The easiest way to do that is to use tegra-uboot-flasher-scripts, though unfortunately that's currently not packaged in NixOS. Once U-Boot is flashed, the ARMv7 image will boot out-of-the-box.

To get the ARMv7 image, follow the generic installation steps.

Finally, install using the installation and configuration steps.

Serial console

Notes about the boot process

Only serial console (via the DB-9 connector) is supported.