NixOS virtual machines on macOS

From NixOS Wiki

NixOS is based on Linux, but a lot of developers are using MacBooks. The nix-darwin project aims to bring the convenience of a declarative system approach to macOS and it is built around Nixpkgs (much like NixOS). After installing Nix, nix-darwin will help us with the following goals:

  1. Build a complete NixOS (Linux) system.
  2. Build this system as a virtual machine image.
  3. Create a script that runs such an image locally using QEMU-KVM.
  4. Build integration tests based on running virtual machines.

For point 1, the challenge is to build Linux binaries from MacOS. This can be solved by using the linux-builder feature provided by the nix-darwin project. (A similar solution is possible without nix-darwin, but requires additional manual setup.) Once we have access to a Linux builder, we need to use the system configuration option natively supported by Nix.

Point 2 is similar to point 1.

Point 3 is similar to point 2, except that it requires a script and a local QEMU KVM. This means that we need to configure the system option to be aarch64-linux for the system we are building, but leave it as aarch64-darwin for the script + QEMU-KVM part.

Once done, we can run the resulting Linux virtual machine on a MacOS M1. Note that the Linux builder is actually such a virtual machine.

Point 4 is similar to point 3, but since the tests are built using virtual machines, it means that these virtual machines are running inside the Linux builder. This is not a problem if our environment supports nested virtualization.

Conversely, it's a problem if it doesn't support nested virtualization. As it happens, M1 doesn't support nested virtualization. So it can run a Linux builder, or any other NixOS virtual machine, but it cannot do so inside e.g. the Linux builder.

Another situation where this is a problem is with the M1 runners provided by GitHub: the runner is itself a virtual machine running on M1, so we can't even start a Linux builder in a GitHub workflow.

GitHub has announced support for macos-15-xlarge in Q4 2024.

Before understanding the above limitations, I experimented on an OakHost M2.S machine. The notes that follow are the result of this experiment.

Nix on M2.S

OakHost is a company that specializes in providing MacOS machines. The machines are usually rented by the month, but they also have a 1-week offer: "try-macos" M2.S. After paying, you get an IP address and a password to SSH into the machine. The username is "customer". 

$ ssh customer@xxx.xxx.xxx.xxx

I haven't done this process enough times to write a script, but the steps to get Nix and nix-darwin installed, and then configured to get a Linux builder, are as follows.

Allow our user to use sudo without retyping the password each time: 

% export NIX_USER="customer"
% echo "%admin ALL = NOPASSWD: ALL" | sudo tee /etc/sudoers.d/passwordless

Install Nix by downloading the install script, making it executable, and running it (we cat /dev/null so the install script doesn't run interactively): 

% curl -sL https://nixos.org/releases/nix/nix-2.9.2/install >/Users/${NIX_USER}/install-nix
% chmod +x /Users/$NIX_USER/install-nix
% cat /dev/null | sudo -i -H -u $NIX_USER -- sh /Users/${NIX_USER}/install-nix --daemon
% rm /Users/${NIX_USER}/install-nix

Once Nix is installed, we need a new shell to actually get access to the nix commands. An alternative is to source the correct file: 

% . /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
% nix --version

nix-darwin

nix-darwin is a project to configure a macOS system using Nix modules, similar to what is done in NixOS.

First configure the nixpkgs and nix-darwin channels, ... 

% sudo -i -H -u $NIX_USER -- nix-channel --add https://github.com/LnL7/nix-darwin/archive/master.tar.gz darwin
% sudo -i -H -u $NIX_USER -- nix-channel --add https://nixos.org/channels/nixpkgs-24.05-darwin nixpkgs
% sudo -i -H -u $NIX_USER -- nix-channel --update

... then install nix-darwin: 

% installer=$(nix-build https://github.com/LnL7/nix-darwin/archive/master.tar.gz -A installer --no-out-link)
% echo N | sudo -i -H -u $NIX_USER -- "$installer/bin/darwin-installer"

The nix-darwin configuration is then located in /Users/customer/.nixpkgs/darwin-configuration.nix.

linux-builder

We can change the configuration file to enable linux-builder. Don't configure it any further at this point; we want to download a pre-built linux-builder from the official nix binary cache. Otherwise, we'll have to build it ourselves (and we won't be able to, since it would require a linux-builder, which we don't have yet). 

    nix.package = pkgs.nix;
    nix.linux-builder.enable = true;
    nix.settings.trusted-users = [ "@admin" ];

In my case, using the channel configured above didn't allow me to get a pre-built linux-builder from the cache.

Instead I got this error; it means we're trying to build something that requires a Linux builder and we don't have it (yet). 

% . /etc/static/zshrc
> darwin-rebuild switch
...
error: a 'aarch64-linux' with features {} is required to build '/nix/store/2931ap3xi18184kzw7ms9lyfm9ngxaag-X-Restart-Triggers-sshd.drv', but I am a 'aarch64-darwin' with features {apple-virt, benchmark, big-parallel, nixos-test}

We can force a specific nixpkgs (and hope that the corresponding linux-builder is in the cache). This worked at the time of this writing: 

{ config, pkgs, ... }:
let
  system = "aarch64-darwin";
  pkgs-darwin = import (builtins.fetchTarball {
    # nixpkgs-24.05-darwin
    url = "https://github.com/nixos/nixpkgs/archive/bf32c404263862fdbeb6e5f87a4bcbc6a01af565.tar.gz";
    sha256 = "132bd16a1wp145wz4m16w2maz0md6y2hp0qn5x1102wkyr9gkk0n";
  }) { inherit system; };
in
{
...

  nix.linux-builder.package = pkgs-darwin.darwin.linux-builder;
...
}

We can confirm that we can start the linux-builder with something like: 

> darwin-rebuild switch
> nix-build \
  --impure \
  --expr '(with import <nixpkgs> { system = "aarch64-linux"; }; runCommand "uname" {} "uname -a > $out")'
> cat result
Linux localhost 6.6.45 #1-NixOS SMP Sun Aug 11 10:47:28 UTC 2024 aarch64 GNU/Linux

Note: If you run the nix-build command above, you'll see logs similar to these, indicating that the linux-builder is being used: 

building '/nix/store/hlvznfa3iwjsrxq3jpn4j4li2pnqbfki-uname.drv' on 'ssh-ng://builder@linux-builder'...
...
copying path '/nix/store/wl2b6fy25y11kl5fbg928j18c7mj26b5-uname' from 'ssh-ng://builder@linux-builder'...

Note: I think the --option sandbox false is not passed to the Linux builder when using nix-build. So we set it in the above configuration file.

linux-builder, further configuration

Remote builders can be configured with additional features. Here, we enable the "kvm", and "nixos-test" features, and disable the sandbox. We also suggest additional tweaks and exposing the builder's logs: 

  nix.linux-builder = {
    enable = true;
    config = {
      nix.settings.sandbox = false;
    };
    ephemeral = true;
    package = pkgs-darwin.darwin.linux-builder;
    maxJobs = 4;
    supportedFeatures = [ "kvm" "benchmark" "big-parallel" "nixos-test" ];
  };
  nix.package = pkgs.nix;
  nix.settings.experimental-features = [ "nix-command" "flakes" ];
  nix.settings.system-features = [ "nixos-test" "apple-virt" ];
  nix.settings.trusted-users = [ "@admin" ];

  launchd.daemons.linux-builder = {
    serviceConfig = {
      StandardOutPath = "/var/log/darwin-builder.log";
      StandardErrorPath = "/var/log/darwin-builder.log";
    };
  };

Note: Notice how further configuring the Linux builder uses the running Linux builder to build the new one.

direnv

Optionally, we might want to use direnv. nix-darwin also makes it easy to get it installed: 

  programs.direnv.enable = true;
  programs.direnv.nix-direnv.enable = true;

(Don't forget to run again darwin-rebuild switch after changing the configuration file.)

Resetting an OakHost machine

It is a manual process to reset the OakHost machine to a state similar to when you received it.

At first, I tried to follow these steps, but it was a dead end:

We shut down the machine: 

> sudo shutdown -h now

The OakHost documentation recommands waiting 1 minute before proceeding with the next step.

In the OakHost web interface, click the "Force Power Off" button, then the "Open KVM Screen" button (located in the "Remote Access" tab).

You will be greeted with two main icons: "Macintosh HD" and "Options".

I choose "Options", then select "Continue", then a disk icon on the right to boot the machine, then "Reinstall macOS Sonoma", then. "Continue" and "Continue".

After a while, you'll get an "OakHost Customer" login prompt. At this point, SSH access is available again (with the same initial password).

But the /etc/nix/ directory was still populated from my previous attempt !

What we want instead is to keep the machine running, then use the KVM to follow these steps: From the Apple menu (the Apple logo), click "System settings...", then "General", then "Transfer or Reset", and finally "Erase all contents and settings...".

The machine reboots, and we can install the system manually. I skip everything I can, including using an Apple ID. As a full name, the original was OakHost Customer and the account name was "customer".

Once you're logged into the machine, don't forget to enable "Remote login" for SSH in "System settings...", "General", "Sharing". At this point we disconnect the KVM screen.

Someone at OakHost suggested disabling sleep mode. 

% sudo pmset -a displaysleep 0
% sudo systemsetup -setcomputersleep Off
% sudo pmset -a hibernatemode 0

This is not necessary for us, but they also added this:

One additional detail: If you want to sign in to the Mac using your iCloud account, please first run the following line to disable the "Find My Mac” module. This won’t impact any iCloud services. Otherwise resetting the device might prove problematic later on due to theft protection: 

> sudo defaults write /Library/Preferences/com.apple.icloud.managed.plist DisableFMMiCloudSetting -bool true

The original machine had also Screen Sharing enabled.

References

Retrieved from "https://wiki.nixos.org/w/index.php?title=NixOS_virtual_machines_on_macOS&oldid=16856"