NVIDIA

There are several kernel drivers that allow Nvidia GPUs to work:

• Nouveau is the stable 3rd-party open-source driver. You probably have it by default.
• Nvidia's proprietary kernel module. Better 3D performance than nouveau.
• Nvidia's open-source kernel module, which is beta-quality and x11-only.

This article aims to explain how to use all three of the non-default drivers, and how to disable the Nvidia GPU if you don't want it to make heat.

(A GPU driver is not purely kernel-mode; there are also userspace parts that allow the graphics API to use the kernel part. Mesa, for example, has userspace parts for Nouveau and NVK; they are automatically used when appropriate, so no configuration is needed. Nvidia's two kernel drivers also need to be hooked up using userspace libraries provided by Nvidia.)

The proprietary driver

NixOS uses a functional package management approach – this section, like many others, will tell you how to change your configuration.nix to define what kind of environment you want on your system.

For the impatient:

• Nvidia section in the NixOS Manual offers a shorter guide.
• Basic installation is as simple as services.xserver.videoDrivers = [ "nvidia" ]; (once you have unfree software enabled), which causes the default stable version to be pulled in.
• Older cards may need an older driver; see Determining the correct driver version, which describes hardware.nvidia.package.
• Modifying the NixOS Configuration puts it all together and shows the other hardware.nvidia settings, some irrelevant to this driver (e.g. hardware.nvidia.open, which takes you to the Nvidia open kernel driver.)

Enable unfree software repositories

Make sure to allow unfree software. The unfree NVIDIA packages include nvidia-x11, nvidia-settings, and nvidia-persistenced.

Modifying NixOS configuration

Ensure that the following is in your NixOS configuration file (customizing as you prefer):

Warning: If you are using a laptop, the below configuration update is not sufficient to get your Nvidia card running! Once you've entered it, please continue reading, as there are important adjustments that must then be made to the configuration before your laptop graphics will work properly.

/etc/nixos/configuration.nix

{ config, lib, pkgs, ... }:
{

  # Enable graphics driver in NixOS unstable/NixOS 24.11
  hardware.graphics.enable = true;
  # The same as above but for NixOS 23.11
  #hardware.opengl = {
  #  enable = true;
  #  driSupport = true;
  #};

  # Load "nvidia" driver for Xorg and Wayland
  services.xserver.videoDrivers = ["nvidia"];

  hardware.nvidia = {

    # Modesetting is required.
    modesetting.enable = true;

    # Nvidia power management. Experimental, and can cause sleep/suspend to fail.
    # Enable this if you have graphical corruption issues or application crashes after waking
    # up from sleep. This fixes it by saving the entire VRAM memory to /tmp/ instead 
    # of just the bare essentials.
    powerManagement.enable = false;

    # Fine-grained power management. Turns off GPU when not in use.
    # Experimental and only works on modern Nvidia GPUs (Turing or newer).
    powerManagement.finegrained = false;

    # Use the NVidia open source kernel module (not to be confused with the
    # independent third-party "nouveau" open source driver).
    # Support is limited to the Turing and later architectures. Full list of 
    # supported GPUs is at: 
    # https://github.com/NVIDIA/open-gpu-kernel-modules#compatible-gpus 
    # Only available from driver 515.43.04+
    # Currently "beta quality", so false is currently the recommended setting.
    open = false;

    # Enable the Nvidia settings menu,
    # accessible via `nvidia-settings`.
    nvidiaSettings = true;

    # Optionally, you may need to select the appropriate driver version for your specific GPU.
    package = config.boot.kernelPackages.nvidiaPackages.stable;
  };
  ...
}

Determining the correct driver version

You might need to determine the appropriate driver version for your card. Some of the options available are:

hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.stable;      # (390 on i686, else production)
hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.beta;        # (555)
hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.production;  # (installs 550)
hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.vulkan_beta; # (550, but different)
hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.legacy_470;
hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.legacy_390;
hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.legacy_340;

Out of the above, stable and beta will work for the latest RTX cards and some lower cards so long as they're not considered "legacy" by Nvidia. For "legacy" cards, you can consult the Nvidia official legacy driver list and check whether your device is supported by the 470, 390 or 340 branches. If so, you can use the corresponding legacy_470, legacy_390 or legacy_340 driver. For a full list of options, consult the nvidia-x11 module repository.

Note: As of early March 2024 the production driver has been updated from 535 to 550. This is a breaking change for some people, especially those on Wayland. To resolve this, follow the steps under Running the new RTX SUPER on NixOS stable

Once you've determined the correct driver version, note it down; you'll need it in the next step.

Laptop configuration: hybrid graphics (Optimus PRIME)

In order to correctly finish configuring your Nvidia graphics driver, you must follow the below steps, which differ depending on whether or not you are using a hybrid graphics setup or not. A laptop with hybrid graphics possesses both an integrated GPU (often part of the central processor) and a discrete, more powerful Nvidia GPU, typically for performance-intensive tasks. This dual-GPU setup allows for power-saving during basic tasks and higher graphics performance when needed.

Nvidia Optimus PRIME is a technology developed by Nvidia to optimize the power consumption and performance of laptops equipped with their GPUs. It seamlessly switches between the integrated graphics, usually from Intel, for lightweight tasks to save power, and the discrete Nvidia GPU for performance-intensive tasks like gaming or video editing. By dynamically balancing graphics power and battery life, Optimus provides the best of both worlds, ensuring that users get longer battery life without sacrificing graphical performance.

Optimus PRIME: bus ID values (mandatory)

Before we can continue, we must first determine the bus ID values for both your Nvidia and Intel and AMD GPUs. This step will be essential regardless of which configuration you later adopt.

First, install the lshw package in order to be able to use the lshw command, then run:

sudo lshw -c display

You will likely get something like this:

*-display
description: i915drmfb
physical id: 0
bus info: pci@0000:0e:00.0
logical name: /dev/fb0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list rom fb
configuration: depth=32 driver=nvidia latency=0 mode=2560x1600 visual=truecolor xres=2560 yres=1600
resources: iomemory:600-5ff iomemory:620-61f irq:220 memory:85000000-85ffffff memory:6000000000-61ffffffff memory:6200000000-6201ffffff ioport:5000(size=128) memory:86000000-8607ffff

*-display
product: i915drmfb
physical id: 2
bus info: pci@0000:00:02.0
logical name: /dev/fb0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm bus_master cap_list rom fb
configuration: depth=32 driver=i915 latency=0 resolution=2560,1600
resources: iomemory:620-61f iomemory:400-3ff irq:221 memory:622e000000-622effffff memory:4000000000-400fffffff ioport:6000(size=64) memory:c0000-dffff memory:4010000000-4016ffffff memory:4020000000-40ffffffff

Note the two values under "bus info" above, which may differ from laptop to laptop. Our Nvidia Bus ID is 0e:00.0 and our Intel Bus ID is 00:02.0.

Warning: Watch out for the formatting; convert the values from hexadecimal to decimal, remove the padding (leading zeroes), replace the dot with a colon.

/etc/nixos/configuration.nix

{
	hardware.nvidia.prime = {
		# Make sure to use the correct Bus ID values for your system!
		intelBusId = "PCI:0:2:0";
		nvidiaBusId = "PCI:14:0:0";
        # amdgpuBusId = "PCI:54:0:0"; For AMD GPU
	};
}

Optimus PRIME modes

Offload mode

Offload mode is available in NixOS 20.09 and higher, and requires an Nvidia card of the Turing generation or newer, an Intel chipset from the Coffee Lake generation or newer, or an AMD Ryzen CPU like the 5800H .

Offload mode puts your Nvidia GPU to sleep and lets the Intel GPU handle all tasks, except if you call the Nvidia GPU specifically by "offloading" an application to it. For example, you can run your laptop normally and it will use the energy-efficient Intel GPU all day, and then you can offload a game from Steam onto the Nvidia GPU to make the Nvidia GPU run that game only. For many, this is the most desirable option.

Offload mode is enabled by running your programs with specific environment variables. Here's a sample script called nvidia-offload that you can run wrapped around your executable, for example nvidia-offload glxgears:

nvidia-offload

export __NV_PRIME_RENDER_OFFLOAD=1
export __NV_PRIME_RENDER_OFFLOAD_PROVIDER=NVIDIA-G0
export __GLX_VENDOR_LIBRARY_NAME=nvidia
export __VK_LAYER_NV_optimus=NVIDIA_only
exec "$@"

To enable offload mode, finish configuring your Nvidia driver by adding the following to your NixOS configuration file:

/etc/nixos/configuration.nix

{
	hardware.nvidia.prime = {
		offload = {
			enable = true;
			enableOffloadCmd = true;
		};
		# Make sure to use the correct Bus ID values for your system!
		intelBusId = "PCI:0:2:0";
		nvidiaBusId = "PCI:14:0:0";
        # amdgpuBusId = "PCI:54:0:0"; For AMD GPU. 
	};
}

Sync mode

Enabling PRIME sync introduces better performance and greatly reduces screen tearing, at the expense of higher power consumption since the Nvidia GPU will not go to sleep completely unless called for, as is the case in Offload Mode. It may also cause its own issues in rare cases. PRIME Sync and Offload Mode cannot be enabled at the same time.

PRIME sync may also solve some issues with connecting a display in clamshell mode directly to the GPU.

/etc/nixos/configuration.nix

{
  hardware.nvidia.prime = {
    sync.enable = true;

    # Make sure to use the correct Bus ID values for your system!
    nvidiaBusId = "PCI:14:0:0";
    intelBusId = "PCI:0:2:0";
    # amdgpuBusId = "PCI:54:0:0"; For AMD GPU
  };
}

Reverse sync mode (experimental)

This feature is relatively new and may not work properly on all systems (see discussion). It is only available on driver 460.39 or newer. Reverse sync only works with services.xserver.displayManager.setupCommands compatible Display Managers (LightDM, GDM and SDDM).

/etc/nixos/configuration.nix

{
  hardware.nvidia.prime = {
    reverseSync.enable = true;
    # Enable if using an external GPU
    allowExternalGpu = false;

    # Make sure to use the correct Bus ID values for your system!
    intelBusId = "PCI:0:2:0";
    nvidiaBusId = "PCI:14:0:0";
    # amdgpuBusId = "PCI:54:0:0"; For AMD GPU
  };
}

Useful tips

Check nixos-hardware

You should check the nixos-hardware GitHub repository. It is possible that someone already wrote a hardware configuration for your device and that usually takes care of drivers. If so, follow the upstream documentation to enable the required modules.

Multiple boot configurations

Imagine you have a laptop that you mostly use in clamshell mode (docked, connected to an external display and plugged into a charger) but that you sometimes use on the go.

In clamshell mode, using PRIME Sync is likely to lead to better performance, external display support, etc., at the cost of potentially (but not always) lower battery life. However, when using the laptop on the go, you may prefer to use offload mode.

NixOS supports "specialisations", which allow you to automatically generate different boot profiles when rebuilding your system. We can, for example, enable PRIME sync by default, but also create a "on-the-go" specialization that disables PRIME sync and instead enables offload mode:

/etc/nixos/configuration.nix

{

specialisation = {
  on-the-go.configuration = {
    system.nixos.tags = [ "on-the-go" ];
    hardware.nvidia = {
      prime.offload.enable = lib.mkForce true;
      prime.offload.enableOffloadCmd = lib.mkForce true;
      prime.sync.enable = lib.mkForce false;
    };
  };
};

}

(You can also add other settings here totally unrelated to Nvidia, such as power profiles, etc.)

After rebuilding and rebooting, you'll see in your boot menu under each Generation an "on-the-go" option, which will let you boot into the on-to-go specialisation for that generation.

Using GPUs on non-NixOS

If you're using Nix-packaged software on a non-NixOS system, you'll need a workaround to get everything up-and-running. The nixGL project provides wrapper to use GL drivers on non-NixOS systems. You need to have GPU drivers installed on your distro (for kernel modules). With nixGL installed, you'll run nixGL foobar instead of foobar.

Note that nixGL is not specific to Nvidia GPUs, and should work with just about any GPU.

CUDA and using your GPU for compute

See the CUDA wiki page.

Using Steam in offload mode

In order to automatically launch Steam in offload mode, you need to add the following to your ~/.bashrc:

export XDG_DATA_HOME="$HOME/.local/share"

Then, if you are using NixOS Steam, run:

mkdir -p ~/.local/share/applications
sed 's/^Exec=/&nvidia-offload /' /run/current-system/sw/share/applications/steam.desktop > ~/.local/share/applications/steam.desktop

For Flatpak Steam, run:

mkdir -p ~/.local/share/applications
sed 's/^Exec=/&nvidia-offload /' /var/lib/flatpak/exports/share/applications/com.valvesoftware.Steam.desktop > ~/.local/share/applications/com.valvesoftware.steam.desktop

Then restart your graphical environment session (or simply reboot).

Running Specific NVIDIA Driver Versions

To run a specific version of the NVIDIA driver in NixOS, you can customize your configuration by specifying the desired version along with the corresponding SHA256 hashes. Below is an example configuration for using NVIDIA driver version `555.58.02`:

/etc/nixos/nvidia.nix

  package = config.boot.kernelPackages.nvidiaPackages.mkDriver {
    version = "555.58.02";
    sha256_64bit = "sha256-xctt4TPRlOJ6r5S54h5W6PT6/3Zy2R4ASNFPu8TSHKM=";
    sha256_aarch64 = "sha256-xctt4TPRlOJ6r5S54h5W6PT6/3Zy2R4ASNFPu8TSHKM=";
    openSha256 = "sha256-ZpuVZybW6CFN/gz9rx+UJvQ715FZnAOYfHn5jt5Z2C8=";
    settingsSha256 = "sha256-ZpuVZybW6CFN/gz9rx+UJvQ715FZnAOYfHn5jt5Z2C8=";
    persistencedSha256 = lib.fakeSha256;
  };

In this configuration:

• Replace `version` with the desired driver version.
• Update the SHA256 hashes to match the new version you want to use.
• After updating the configuration, run sudo nixos-rebuild switch to apply the changes and load the specified NVIDIA driver version.

This allows you to pin the specific driver version being used in your NixOS installation.

Running the new RTX SUPER on NixOS stable

The new RTX Super cards are not supported by the 545 driver. On NixOS stable, you want to use the 535 driver that come from unstable branch or the 550 (beta). To do that you need to manually call the driver you want in your config. Check on this link to choose the driver you want and change your config accordingly : https://github.com/NixOS/nixpkgs/blob/979a311fbd179b86200e412a3ed266b64808df4e/pkgs/os-specific/linux/nvidia-x11/default.nix#L36

/etc/nixos/nvidia.nix

{
  pkgs,
  config,
  ...
}:

{
  # Enable graphics driver in NixOS unstable/NixOS 24.11
  hardware.graphics.enable = true;
  # The same as above but for NixOS 23.11
  #hardware.opengl = {
  #  enable = true;
  #  driSupport = true;
  #};

  # Load nvidia driver for Xorg and Wayland
  services.xserver.videoDrivers = [ "nvidia" ];

  hardware.nvidia.modesetting.enable = true;
  hardware.nvidia.powerManagement.enable = false;
  hardware.nvidia.powerManagement.finegrained = false;
  hardware.nvidia.open = false;
  hardware.nvidia.nvidiaSettings = true;
  # Special config to load the latest (535 or 550) driver for the support of the 4070 SUPER
  hardware.nvidia.package =
    let
      rcu_patch = pkgs.fetchpatch {
        url = "https://github.com/gentoo/gentoo/raw/c64caf53/x11-drivers/nvidia-drivers/files/nvidia-drivers-470.223.02-gpl-pfn_valid.patch";
        hash = "sha256-eZiQQp2S/asE7MfGvfe6dA/kdCvek9SYa/FFGp24dVg=";
      };
    in
    config.boot.kernelPackages.nvidiaPackages.mkDriver {
      version = "535.154.05";
      sha256_64bit = "sha256-fpUGXKprgt6SYRDxSCemGXLrEsIA6GOinp+0eGbqqJg=";
      sha256_aarch64 = "sha256-G0/GiObf/BZMkzzET8HQjdIcvCSqB1uhsinro2HLK9k=";
      openSha256 = "sha256-wvRdHguGLxS0mR06P5Qi++pDJBCF8pJ8hr4T8O6TJIo=";
      settingsSha256 = "sha256-9wqoDEWY4I7weWW05F4igj1Gj9wjHsREFMztfEmqm10=";
      persistencedSha256 = "sha256-d0Q3Lk80JqkS1B54Mahu2yY/WocOqFFbZVBh+ToGhaE=";

      #version = "550.40.07";
      #sha256_64bit = "sha256-KYk2xye37v7ZW7h+uNJM/u8fNf7KyGTZjiaU03dJpK0=";
      #sha256_aarch64 = "sha256-AV7KgRXYaQGBFl7zuRcfnTGr8rS5n13nGUIe3mJTXb4=";
      #openSha256 = "sha256-mRUTEWVsbjq+psVe+kAT6MjyZuLkG2yRDxCMvDJRL1I=";
      #settingsSha256 = "sha256-c30AQa4g4a1EHmaEu1yc05oqY01y+IusbBuq+P6rMCs=";
      #persistencedSha256 = "sha256-11tLSY8uUIl4X/roNnxf5yS2PQvHvoNjnd2CB67e870=";

      patches = [ rcu_patch ];
    };
}

Troubleshooting

Booting to text mode

If you encounter the problem of booting to text mode you might try adding the Nvidia kernel module manually with:

boot.initrd.kernelModules = [ "nvidia" ];
boot.extraModulePackages = [ config.boot.kernelPackages.nvidia_x11 ];

Screen tearing issues

First, try to switch to PRIME sync mode, as described above. If that doesn't work, try forcing a composition pipeline.

Note: Forcing a full composition pipeline has been reported to reduce the performance of some OpenGL applications and may produce issues in WebGL. It also drastically increases the time the driver needs to clock down after load.

/etc/nixos/configuration.nix

hardware.nvidia.forceFullCompositionPipeline = true;

Flickering with Picom

~/.config/picom/picom.conf

unredir-if-possible = false;
backend = "xrender"; # try "glx" if xrender doesn't help
vsync = true;

Graphical corruption and system crashes on suspend/resume

powerManagement.enable = true can sometimes fix this, but is itself unstable and is known to cause suspend issues.

If you have a modern Nvidia GPU (Turing [1] or later), you may also want to investigate the hardware.nvidia.powerManagement.finegrained option: [2]

Black screen or 'nothing works' on laptops

The kernel modulei915for Intel oramdgpufor AMD may interfere with the Nvidia driver. This may result in a black screen when switching to the virtual terminal, or when exiting the X session. A possible workaround is to disable the integrated GPU by blacklisting the module, using the following configuration option (see also [3]):

# intel
boot.kernelParams = [ "module_blacklist=i915" ];
# AMD
boot.kernelParams = [ "module_blacklist=amdgpu" ];

The Nvidia open driver

The Nvidia open driver is enabled via:

services.xserver.videoDrivers = [ "nvidia" ];
hardware.nvidia.open = true;

The Nvidia open driver is very similar to its proprietary sibling. Most content in the proprietary section above apply; just copy over the proprietary config above and toggle the "open" option, and you are set.

Like its proprietary sibling, it also requires some non-free userspace packages that allow software to talk to the kernel driver. As a result, you still need to enable unfree packages.

Be warned that the Nvidia open driver is considered "beta quality". Performance may be very slightly lower.

(Update to be incorporated: Nvidia has announced in July 2024 that the upcoming version R560 will "fully transisition" towards the open-source kernel module. This means that the default kernel module installed by Nvidia scripts will be the open-source one. This is justified as the open-source driver is now as stable and performant as (if not more than) the closed-sourced driver. The new driver only applies to Turing and later GPUs; older hardware with Maxwell, Pascal, or Volta will still require the proprietary version.)

Disable Nvidia dGPU completely

It's possible to completely disable the dGPU, saving battery. Probably not all configurations and module blacklists are required but this worked successfully:

/etc/nixos/configuration.nix

boot.extraModprobeConfig = ''
  blacklist nouveau
  options nouveau modeset=0
'';
  
services.udev.extraRules = ''
  # Remove NVIDIA USB xHCI Host Controller devices, if present
  ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x0c0330", ATTR{power/control}="auto", ATTR{remove}="1"
  # Remove NVIDIA USB Type-C UCSI devices, if present
  ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x0c8000", ATTR{power/control}="auto", ATTR{remove}="1"
  # Remove NVIDIA Audio devices, if present
  ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x040300", ATTR{power/control}="auto", ATTR{remove}="1"
  # Remove NVIDIA VGA/3D controller devices
  ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x03[0-9]*", ATTR{power/control}="auto", ATTR{remove}="1"
'';
boot.blacklistedKernelModules = [ "nouveau" "nvidia" "nvidia_drm" "nvidia_modeset" ];