NixOS on ARM/Orange Pi Zero Plus2 H5: Difference between revisions
imported>Samueldr m Misc. fixes for u-boot |
Phanirithvij (talk | contribs) m update orangepi zero plus 2 link |
||
| (One intermediate revision by one other user not shown) | |||
| Line 16: | Line 16: | ||
|- | |- | ||
!Maintainer | !Maintainer | ||
| | | | ||
|} | |} | ||
</div> | </div> | ||
| Line 58: | Line 58: | ||
== Resources == | == Resources == | ||
* [http://www.orangepi.org/ | * [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html Official product page] | ||
* [http://linux-sunxi.org/Xunlong_Orange_Pi_Zero_Plus_2 linux-sunxi wiki page] | * [http://linux-sunxi.org/Xunlong_Orange_Pi_Zero_Plus_2 linux-sunxi wiki page] | ||
Latest revision as of 09:31, 14 September 2024
| Orange Pi Zero Plus2 (H5) | |
|---|---|
| |
| Manufacturer | Xunlong / Orange Pi |
| Architecture | AArch64 |
| Bootloader | Upstream u-boot[1] |
| Maintainer | |
Status
Upstream NixOS AArch64 image will boot on the Orange Pi Zero Plus2 (H5), using the proper upstream u-boot.
Board-specific installation notes
First follow the generic installation steps to get the installer image on an SD card.
U-Boot needs to be copied to specific sectors on the microSD card with dd. Download u-boot for the board, and copy it to the correct location with (again, replace /dev/sdX with the correct path to the SD card device):
sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=1024 seek=8
Then, install using the installation and configuration steps.
Serial console
 |
This article or section needs expansion.
Reason: This article is a stub. (Discuss in Talk:NixOS on ARM/Orange Pi Zero Plus2 H5#)
Please consult the pedia article metapage for guidelines on contributing. |
Wireless
The wireless does not currently work using the upstream firmware from the firmware-linux-nonfree package. However there is a version of the firmware which does work in the Armbian firmware repository. See here for an example of how the firmware from this repository can be added to nixpkgs, such that it overrides the upstream files.
Compatibility notes
- Using the upstream kernel at 4.18, HDMI does work currently.