IGVT-g

Intel GVT-g is a full GPU virtualization solution with mediated pass-through which allows host and multiple guests to share same Intel integrated videocard. Guest gets a near-native graphics peformance.

Win7-32 / Win7-64 / Win8.1-64 /Win10-RS1-64 are validated.

Hardware Requirements

For client platforms, 5th, 6th or 7th Generation Intel® Core Processor Graphics is required. For server platforms, E3_v4, E3_v5 or E3_v6 Xeon Processor Graphics is required.

Select VGPU devices

Enable iGVT-g with

/etc/nixos/configuration.nix

  virtualisation.kvmgt.enable = true;

then rebuild and reboot. Choose virtual GPU

 $ ls /sys/bus/pci/devices/0000:00:02.0/mdev_supported_types/
 i915-GVTg_V5_4/  i915-GVTg_V5_8/

 $ cat /sys/bus/pci/devices/0000:00:02.0/mdev_supported_types/i915-GVTg_V5_8/description 
 low_gm_size: 64MB
 high_gm_size: 384MB
 fence: 4
 resolution: 1024x768
 weight: 2

Generate UUID

 $ nix run nixpkgs.libossp_uuid -c uuid
 a297db4a-f4c2-11e6-90f6-d3b88d6c9525

NixOS configuration

/etc/nixos/configuration.nix

  virtualisation.kvmgt.enable = true; 
  virtualisation.kvmgt.vgpus = {
    "i915-GVTg_V5_8" = {
      uuid = "a297db4a-f4c2-11e6-90f6-d3b88d6c9525";
    };
  };
  environment.systemPackages = with pkgs; [
  virtmanager
  virt-viewer
  ];
  virtualisation.libvirtd.enable = true;
  users.extraUsers.user.extraGroups = [ "libvirtd" ];

Configure KVM

Bare Qemu

 qemu-system-x86_64 \
    -enable-kvm \
    -m 1G \
    -nodefaults \
    -M graphics=off \
    -serial stdio \
    -display gtk,gl=on \
    -device vfio-pci,sysfsdev=/sys/bus/mdev/devices/a297db4a-f4c2-11e6-90f6-d3b88d6c9525,display=on,x-igd-opregion=on

libvirtd

If using virt-manager, create new or open existing VM. Change existing <graphics> and <video> sections.

sudo -E virsh edit win10

<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
  <devices>
    <graphics type='spice'>
      <listen type='none'/>
      <gl enable='yes'/>
    </graphics>
    <video>
      <model type='none'/>
    </video>
    <hostdev mode='subsystem' type='mdev' managed='no' model='vfio-pci' display='on'>
      <source>
        <address uuid='a297db4a-f4c2-11e6-90f6-d3b88d6c9525'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
    </hostdev>
  </devices>
  <qemu:commandline>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.hostdev0.x-igd-opregion=on'/>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.hostdev0.ramfb=on'/>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.hostdev0.driver=vfio-pci-nohotplug'/>
  </qemu:commandline>
</domain>

Finally use sudo virt-viewer --attach win10

FAQ

• No video output

• • use BIOS (SeaBIOS) machine, EFI (OVMF) is not supported. As a workaround you may create qcow boot image that is capable of booting EFI windows disk on BIOS machine

• • ensure that the recent Intel graphics driver is installed in the guest

• (libvirtd) "Element domain has extra content: qemu:commandline" error after editing via virsh

• • you forgot to add xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'

• (libvirtd) "no drm render node available" error in virt-manager

• • in virt-manager change SPICE display render node from auto to available one

• "write_loop: No space left on device" error when creating mdev device

• • check whether available instances are left

 $ cat /sys/bus/pci/devices/0000\:00\:02.0/mdev_supported_types/i915-GVTg_V5_4/available_instances 
 1

also check dmesg output for gvt related error, most likely there is not enough VRAM

• There is no VGPU device that has resolution of my screen

• • Use this program in guest https://www.monitortests.com/forum/Thread-Custom-Resolution-Utility-CRU to set resolution you need

• (libvirtd) VM stops immediately with no error other than "internal error: process exited while connecting to monitor"

• • qemu might be exiting due to SIGSYS, which may be related to this bug: https://github.com/intel/gvt-linux/issues/47

Try disabling seccomp sandboxing in qemu like so:

  virtualisation.libvirtd = {
    qemuVerbatimConfig = ''
      seccomp_sandbox = 0
    '';
  };

Useful sources

• vgpu display support on a contributor (kraxel)'s blog - this guide misses info that Windows guest requires x-igd-opregion=on parameter and also that QXL may go into conflict
• https://github.com/intel/gvt-linux/wiki/GVTg_Setup_Guide - obsoleted guide, but some parts are useful
• https://github.com/intel/gvt-linux/wiki/Dma_Buf_User_Guide - obsoleted guide, but some parts are useful
• https://blog.bepbep.co/posts/gvt/ - How to get 60fps!