Nix package manager: Difference between revisions

From NixOS Wiki
imported>Mic92
m →‎Alternative Interpreters: Mention Lix in the Nix page.
 
(91 intermediate revisions by 25 users not shown)
Line 1: Line 1:
{{warning|text="This discussion article is incomplete, so contributions are welcome. Please consult the [[:Category:Discussion|discussion article metapage]] for guidelines on contributing to discussion articles."}}


This [[:Category:Discussion|discussion]] article is to cover the usage, internals and configuration of the Nix package manager.
Nix is a package manager and build system that parses reproducible build instructions specified in the [[Nix Expression Language]], a pure functional language with lazy evaluation. Nix expressions are pure functions<ref>Values cannot change during computation. Functions always produce the same output if their input does not change. </ref>taking dependencies as arguments and producing a ''[[Derivations|derivation]]'' specifying a reproducible build environment for the package. Nix stores the results of the build in unique addresses specified by a hash of the complete dependency tree, creating an immutable package store (aka the [[#Nix store|nix store]]) that allows for atomic upgrades, rollbacks and concurrent installation of different versions of a package, essentially eliminating [https://en.wikipedia.org/wiki/Dependency_hell dependency hell].  


== Usage ==


= Nix on Linux =
=== Installation ===
NixOS: Nix is being installed while you install NixOS.


== Install Nix for a single user ==
If you intend to utilize Nix on a different Linux distribution or a Mac computer, you can perform a standalone installation:  The [https://nixos.org/manual/nix/stable/installation/installation installation section of the Nix manual] describes the installation of standalone Nix from binary or source.


To install Nix from any Linux distribution, use the following two commands (assumes you have the permission to use sudo and you are logged in as the user you want to install Nix for).
=== Nix commands ===


<syntaxHighlight lang="bash">
The [[Nix command|Nix commands]] are documented in the [https://nixos.org/manual/nix/stable/command-ref/command-ref Nix reference manual]: main commands, utilities and experimental commands. Prior to version 2.0 (released in February 2018) there have been different commands.
sudo install -d -m755 -o $USER -g $USER /nix
curl https://nixos.org/nix/install | sh
</syntaxHighlight>


After that being done, you can use all Nix commands as a normal user without any special permissions (for example by using <code>sudo</code>)
=== Configuration ===
On NixOS, Nix is configured through the [https://search.nixos.org/options?query=nix. <code>nix</code> option].


== Common Errors ==
Standalone Nix is configured through <code>nix.conf</code> (usually found in <code>/etc/nix/</code>), which defines a number of settings relating to evaluation, builds, garbage collection, sandboxing, and user permissions. Details on the available options are [https://nixos.org/manual/nix/stable/command-ref/conf-file found in the Nix reference manual].


=== Bad configuration option: gssapikexalgorithms ===
Even further configuration is possible with [[Home Manager]] to manage declarative environments for a single user. For system-wide configuration on Linux, you can use [https://github.com/numtide/system-manager System Manager]. For system-wide configuration on macOS, [https://github.com/LnL7/nix-darwin nix-darwin] is the preferred solution. 


Found when using an SSH binary from Nix on typically RPM-based distros like CentOS, Fedora, Scientific Linux, Redhat, etc. '''The quick fix:''' Just comment out the configuration option in the ssh config file, you probably don't need it.
== Internals ==


[[Category:Discussion]]
=== Nix store ===
 
Packages built by Nix are placed in the read-only ''Nix store'', normally found in <code>/nix/store</code>. Each package is given a unique address specified by a cryptographic hash followed by the package name and version, for example <code>/nix/store/nawl092prjblbhvv16kxxbk6j9gkgcqm-git-2.14.1</code>. These prefixes hash all the inputs to the build process, including the source files, the full dependency tree, compiler flags, etc. This allows Nix to simultaneously install different versions of the same package, and even different builds of the same version, for example variants built with different compilers. When adding, removing or updating a package, nothing is removed from the store; instead, symlinks to these packages are added, removed or changed in ''profiles''.
 
=== Profiles ===
 
In order to construct a coherent user or system environment, Nix symlinks entries of the Nix store into ''profiles''. These are the front-end by which Nix allows rollbacks: since the store is immutable and previous versions of profiles are kept, reverting to an earlier state is simply a matter of change the symlink to a previous profile. To be more precise, Nix symlinks binaries into entries of the Nix store representing the user environments. These user environments are then symlinked into labeled profiles stored in <code>/nix/var/nix/profiles</code>, which are in turn symlinked to the user's <code>~/.nix-profile</code>.
 
=== Sandboxing ===
 
When sandbox builds are enabled, Nix will setup an isolated environment for each build process. It is used to remove further hidden dependencies set by the build environment to improve reproducibility. This includes access to the network during the build outside of <code>fetch*</code> functions and files outside the Nix store.  Depending on the operating system access to other resources are blocked as well (ex. inter process communication is isolated on Linux); see [https://nixos.org/nix/manual/#sec-conf-file nix.conf section] in the Nix manual for details.
 
Sandboxing is enabled by default on Linux, and disabled by default on macOS.
In pull requests for [https://github.com/NixOS/nixpkgs/ Nixpkgs] people are asked to test builds with sandboxing enabled (see <code>Tested using sandboxing</code> in the pull request template) because in [https://nixos.org/hydra/ official Hydra builds] sandboxing is also used.
 
To configure Nix for sandboxing, set <code>sandbox = true</code> in <code>/etc/nix/nix.conf</code>; to configure NixOS for sandboxing set <code>nix.useSandbox = true;</code> in <code>configuration.nix</code>. The <code>nix.useSandbox</code> option is <code>true</code> by default since NixOS 17.09.
 
=== Alternative Interpreters ===
 
There is an ongoing effort to reimplement Nix, from the ground up, in Rust.
 
* [https://cs.tvl.fyi/depot/-/tree/tvix tvix]
 
There is also a community-led fork of Nix 2.18 named Lix, focused on correctness, usability, and growth. While it has also ported some components of Nix to Rust, it is not a ground-up rewrite like Tvix.
 
* [https://lix.systems/ lix]
 
Earlier attempts can be found on [https://riir-nix.github.io/ riir-nix]
 
==Notes==
<references />
 
 
[[Category:Pedias]]
[[Category:Nix]]
[[Category:Nix]]
[[Category:Incomplete]]
[[Category:Incomplete]]
[[Category:Software]]

Latest revision as of 19:46, 27 October 2024

Nix is a package manager and build system that parses reproducible build instructions specified in the Nix Expression Language, a pure functional language with lazy evaluation. Nix expressions are pure functions[1]taking dependencies as arguments and producing a derivation specifying a reproducible build environment for the package. Nix stores the results of the build in unique addresses specified by a hash of the complete dependency tree, creating an immutable package store (aka the nix store) that allows for atomic upgrades, rollbacks and concurrent installation of different versions of a package, essentially eliminating dependency hell.

Usage

Installation

NixOS: Nix is being installed while you install NixOS.

If you intend to utilize Nix on a different Linux distribution or a Mac computer, you can perform a standalone installation: The installation section of the Nix manual describes the installation of standalone Nix from binary or source.

Nix commands

The Nix commands are documented in the Nix reference manual: main commands, utilities and experimental commands. Prior to version 2.0 (released in February 2018) there have been different commands.

Configuration

On NixOS, Nix is configured through the nix option.

Standalone Nix is configured through nix.conf (usually found in /etc/nix/), which defines a number of settings relating to evaluation, builds, garbage collection, sandboxing, and user permissions. Details on the available options are found in the Nix reference manual.

Even further configuration is possible with Home Manager to manage declarative environments for a single user. For system-wide configuration on Linux, you can use System Manager. For system-wide configuration on macOS, nix-darwin is the preferred solution.

Internals

Nix store

Packages built by Nix are placed in the read-only Nix store, normally found in /nix/store. Each package is given a unique address specified by a cryptographic hash followed by the package name and version, for example /nix/store/nawl092prjblbhvv16kxxbk6j9gkgcqm-git-2.14.1. These prefixes hash all the inputs to the build process, including the source files, the full dependency tree, compiler flags, etc. This allows Nix to simultaneously install different versions of the same package, and even different builds of the same version, for example variants built with different compilers. When adding, removing or updating a package, nothing is removed from the store; instead, symlinks to these packages are added, removed or changed in profiles.

Profiles

In order to construct a coherent user or system environment, Nix symlinks entries of the Nix store into profiles. These are the front-end by which Nix allows rollbacks: since the store is immutable and previous versions of profiles are kept, reverting to an earlier state is simply a matter of change the symlink to a previous profile. To be more precise, Nix symlinks binaries into entries of the Nix store representing the user environments. These user environments are then symlinked into labeled profiles stored in /nix/var/nix/profiles, which are in turn symlinked to the user's ~/.nix-profile.

Sandboxing

When sandbox builds are enabled, Nix will setup an isolated environment for each build process. It is used to remove further hidden dependencies set by the build environment to improve reproducibility. This includes access to the network during the build outside of fetch* functions and files outside the Nix store. Depending on the operating system access to other resources are blocked as well (ex. inter process communication is isolated on Linux); see nix.conf section in the Nix manual for details.

Sandboxing is enabled by default on Linux, and disabled by default on macOS. In pull requests for Nixpkgs people are asked to test builds with sandboxing enabled (see Tested using sandboxing in the pull request template) because in official Hydra builds sandboxing is also used.

To configure Nix for sandboxing, set sandbox = true in /etc/nix/nix.conf; to configure NixOS for sandboxing set nix.useSandbox = true; in configuration.nix. The nix.useSandbox option is true by default since NixOS 17.09.

Alternative Interpreters

There is an ongoing effort to reimplement Nix, from the ground up, in Rust.

There is also a community-led fork of Nix 2.18 named Lix, focused on correctness, usability, and growth. While it has also ported some components of Nix to Rust, it is not a ground-up rewrite like Tvix.

Earlier attempts can be found on riir-nix

Notes

  1. Values cannot change during computation. Functions always produce the same output if their input does not change.